Electrolux LAVAMAT 74700 manual General safety, Resulting overheating may constitute a fire hazard

Page 6

General safety

•Repairs to the washing machine may only be carried out by qualified/ authorised service engineers.

•Never use the appliance when the electrical cable is damaged or the control panel, worktop or plinth area are damaged to such an extent that the inside of the appliance is openly accessible.

•Switch off the washing machine prior to cleaning it and carrying out maintenance. In addition, remove the power plug from the power point or – if the appliance has been hard-wired – switch off the cut- out in the fuse box or completely remove the fuse.

•If operation is stopped, disconnect the appliance from the mains sup- ply and turn off the tap.

•Never remove the power plug from the power point by pulling on the cable. Always pull the plug.

•Multiway-plugs, connectors and extension cables must not be used.

Resulting overheating may constitute a fire hazard.

•Never wash the washing machine down with a water jet. Danger of electric shock.

•When using wash programmes with high temperatures the glass in the door will become hot. Do not touch it!

•Before emergency emptying of the appliance, before cleaning the drain pump or opening the door in an emergency, let the water cool down.

•Small animals can nibble on electrical cables and water hoses. This can constitute a risk of electrocution and water damage. Keep small animals away from the washing machine.

6

Image 6

Contents Lavamat Following symbols are used in the text Dear CustomerContents Installation and connection instructions Safety information concerning installationChild safety SafetyPrior to using the appliance for the first time Follow the Installation and connection instructionsGeneral safety Resulting overheating may constitute a fire hazardDescription of the appliance Control panelProgramme overview RefreshApplication/Features Care Symbols1 Preparing washing Before the first washPreparing and sorting washing Sorting washingAdding detergent /conditioner Running a wash cycleOpening the door/loading washing Open the door pull the handle on the doorIf you are using liquid detergent Washing powder/tablets for the main wash cycleSwitching on the appliance/selecting a programme Changing the spin speed/selecting rinse holdSelecting additional programmes Shortened wash programme for lightly soiled itemsSetting the delay timer Starting a programmeProgramme sequence Interrupting a programme/adding washing End of the wash cycle/removing the washingOverdosing Child safety device Deactivating the child safety deviceDetergent dispenser drawer Cleaning and maintenanceCleaning procedure Washing drumWhat to do if Remedying small faults yourselfClean the glass in the door and the rubber collar regularly Door and rubber collarE10 appears Tap is shut off Turn on the tap END indicator is If the wash result is not satisfactory There are grey stains on the washingFoam can still be seen following the final rinse When the water has all drained away Carrying out an emergency drainThere are white residues on the washing Drain pump Disposal Packaging materialOld appliance Technical data Consumption valuesSafety information concerning installation This washing machine cannot be built-inTransporting the appliance Installing the applianceWhen using a sack trolley to transport the washing machine Removing the transit packagingWhere to install Making the appliance level If the appliance is to stand on a baseBrown Live Wire coloured green and yellow Electrical ConnectionPermanent Connection Water inlet Connecting the appliance to the water supplyPermitted water pressure 35m long pressure hose is supplied with the applianceWater Drainage From your Service Force Centre Pumping heights of over 1 metreFor drainage into an outlet Warranty conditions Great BritainFor general enquiries concerning 0870 5 929Customer Care Major AppliancesAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG