Electrolux LAVAMAT 74700 manual Making the appliance level, If the appliance is to stand on a base

Page 29

•If the location in which the appliance is to be installed is fitted with small-format tiles, put a rubber mat (available in the shops) under the appliance.

If the appliance is to stand on a base:

In order for the appliance to be se- cure on the base, fixing plates*) must be mounted, into which the appliance is inserted.

If the appliance is to stand on a floor which moves, e.g. a suspend- ed wooden floor:

Place the appliance in an area as close as possible to a corner of the room.

Screw a water-resistant wooden board (at least 15 mm thick) onto at least 2 of the floor joists.

Making the appliance level

The four feet of the appliance are pre-adjusted.

Large degrees of unevenness can be compensated for by individually ad- justing the height adjustable screw feet.

Use the special spanner supplied to do this.

Important! Do not use pieces of wood, cardboard or such like to lev- el out unevenness in the floor, but adjust the height adjustable screw feet instead.

29

Image 29

Contents Lavamat Dear Customer Following symbols are used in the textContents Safety information concerning installation Installation and connection instructionsPrior to using the appliance for the first time SafetyChild safety Follow the Installation and connection instructionsResulting overheating may constitute a fire hazard General safetyControl panel Description of the applianceRefresh Programme overviewApplication/Features Care Symbols1 Preparing and sorting washing Before the first washPreparing washing Sorting washingOpening the door/loading washing Running a wash cycleAdding detergent /conditioner Open the door pull the handle on the doorWashing powder/tablets for the main wash cycle If you are using liquid detergentChanging the spin speed/selecting rinse hold Switching on the appliance/selecting a programmeShortened wash programme for lightly soiled items Selecting additional programmesProgramme sequence Setting the delay timerStarting a programme Overdosing Interrupting a programme/adding washingEnd of the wash cycle/removing the washing Deactivating the child safety device Child safety deviceCleaning procedure Cleaning and maintenanceDetergent dispenser drawer Washing drumClean the glass in the door and the rubber collar regularly Remedying small faults yourselfWhat to do if Door and rubber collarE10 appears Tap is shut off Turn on the tap END indicator is Foam can still be seen following the final rinse If the wash result is not satisfactoryThere are grey stains on the washing There are white residues on the washing When the water has all drained awayCarrying out an emergency drain Drain pump Old appliance DisposalPackaging material Consumption values Technical dataThis washing machine cannot be built-in Safety information concerning installationWhen using a sack trolley to transport the washing machine Installing the applianceTransporting the appliance Removing the transit packagingWhere to install If the appliance is to stand on a base Making the appliance levelPermanent Connection Brown Live Wire coloured green and yellowElectrical Connection Permitted water pressure Connecting the appliance to the water supplyWater inlet 35m long pressure hose is supplied with the applianceWater Drainage For drainage into an outlet From your Service Force CentrePumping heights of over 1 metre Great Britain Warranty conditionsCustomer Care 0870 5 929For general enquiries concerning Major AppliancesAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG