Electrolux LAVAMAT 74700 manual Running a wash cycle, Opening the door/loading washing

Page 11

Running a wash cycle

Opening the door/loading washing

1.Open the door: pull the handle on the door.

When the appliance is switched on, the DOOR and START/PAUSE indica- tors show whether the door can be opened:

	DOOR indicator	START/PAUSE indicator	Can the door be opened?
	illuminated green	flashing red or not illumi-	yes
	illuminated green	nated	yes
		nated
	illuminated green	illuminated red	yes, after pressing the
	illuminated green	illuminated red	START/PAUSE button
			START/PAUSE button
	illuminated red	flashing red	no, water level and/or
	or not illuminated	or illuminated red	temperature too high

2.Separate washing and load it loose-

ly. Mix large and small items. Important: Do not get any washing caught between the door and the rubber seal.

3.Firmly push the door shut. Door catch must audibly click shut.

Adding detergent /conditioner

Important: Only use detergents/conditioners that are suitable for use in household washing machines.

Add detergent/conditioner in accordance with the detergent/condi- tioner manufacturer’s instructions. Observe instructions on the packag- ing.

The amount of detergent used depends on:

–the degree of soiling,

–the load size

–the hardness of the tap water.

•If the manufacturer does not make any recommendations with re- gard to small volumes of washing: For a half-load use a third less, and for a very small load use only the half the amount of detergent that is recommended for a full load.

11

Image 11

Contents Lavamat Dear Customer Following symbols are used in the textContents Safety information concerning installation Installation and connection instructionsFollow the Installation and connection instructions SafetyPrior to using the appliance for the first time Child safetyResulting overheating may constitute a fire hazard General safetyControl panel Description of the applianceRefresh Programme overviewApplication/Features Care Symbols1 Sorting washing Before the first washPreparing and sorting washing Preparing washingOpen the door pull the handle on the door Running a wash cycleOpening the door/loading washing Adding detergent /conditionerWashing powder/tablets for the main wash cycle If you are using liquid detergentChanging the spin speed/selecting rinse hold Switching on the appliance/selecting a programmeShortened wash programme for lightly soiled items Selecting additional programmesProgramme sequence Setting the delay timerStarting a programme Overdosing Interrupting a programme/adding washingEnd of the wash cycle/removing the washing Deactivating the child safety device Child safety deviceWashing drum Cleaning and maintenanceCleaning procedure Detergent dispenser drawerDoor and rubber collar Remedying small faults yourselfClean the glass in the door and the rubber collar regularly What to do ifE10 appears Tap is shut off Turn on the tap END indicator is Foam can still be seen following the final rinse If the wash result is not satisfactoryThere are grey stains on the washing There are white residues on the washing When the water has all drained awayCarrying out an emergency drain Drain pump Old appliance DisposalPackaging material Consumption values Technical dataThis washing machine cannot be built-in Safety information concerning installationRemoving the transit packaging Installing the applianceWhen using a sack trolley to transport the washing machine Transporting the applianceWhere to install If the appliance is to stand on a base Making the appliance levelPermanent Connection Brown Live Wire coloured green and yellowElectrical Connection 35m long pressure hose is supplied with the appliance Connecting the appliance to the water supplyPermitted water pressure Water inletWater Drainage For drainage into an outlet From your Service Force CentrePumping heights of over 1 metre Great Britain Warranty conditionsMajor Appliances 0870 5 929Customer Care For general enquiries concerningAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG