Vidikron 30ET Operation, Maintenance and Troubleshooting, Serial Communications, Specifications

Table of Contents

	Connections to the Vision 30	22
	Connector Panel Access	22
	Connecting Source Components to the Vision 30	22
	RS-232 Controller Connection	26
	Connecting 12-volt Trigger Output to External Theater Equipment	27
	Connecting to AC Power	27
	Removing the Lens Cap	27
	Turning On the Power	28
	Changing the OSD Language	28
	Adjusting the Picture Orientation	28
	Zoom and Focus Adjustments	28
	Installing and Adjusting the CineWide Anamorphic Lens	29
	Installing the Anamorphic Lens	30
	Adjusting the Anamorphic Lens	30
4.	Operation	33
	Selecting Video Memory	33
	Selecting an Aspect Ratio	33
	Selecting An Input Source	33
	Using Picture-In-Picture and Picture-By-Picture (PIP/PBP)	33
	Turning Off the Power	34
	Using the On-Screen Menus	34
	Main Menu	36
	Picture Adjust	36
	Image Option	41
	Projector Status	44
	Installation	45
	Service	46
	ISF Calibration	50
5.	Maintenance and Troubleshooting	53
	Lamp Replacement	53
	Troubleshooting Tips	54
6.	Serial Communications	57
	RS-232 Connection and Port Configuration	57
	Serial Command Syntax	57
7.	Specifications	61
	Vision 30 Specifications	61
	Vision 30 Dimensions	63
APPENDIX A. Personalizing the ISF Splash Screen on the Vision 30		A-1

viii Vidikron Vision 30 Series Owner’s Operating Manual