Vidikron 30ET manual Installing and Adjusting the CineWide Anamorphic Lens

Installation

If you are installing a CineWide-equipped projector, proceed as follows to install and adjust the anamorphic lens.

It is extremely important that the primary lens is properly adjusted

Note before you install the anamorphic lens. Ensure that the image from

the primary lens is perfectly centered on the screen.

The Anamorphic lens mount kit consists of everything shown in Figure 3-11.If any items are missing or damaged, please contact your Vidikron dealer or Vidikron Customer Service at (888) 4VIDIKRON.

3Anamorphic Lens

2 Mounting Bracket (2x)

7 Pitch/Y-Adjustment Screw, 4-40 x 5/16" (4x)

1 Base Plate

6 Fender

Washer (4x)

8 Base Plate Mounting

Screw, Phillips,

M6 x 1.0 x 16mm (2x)

4 Yaw/Z-Adjustment Knob (2x) 5 Fiber Washer (2x)

Figure 3-11. Anamorphic Lens Mounting Assembly - Exploded View

3.12

Installing and Adjusting the CineWide Anamorphic Lens

Vidikron Vision 30 Series Owner’s Operating Manual 29