Vidikron 30ET manual Remote

Operation

Table 4-1. Aspect Ratio Settings (continued)

	Remote
Aspect Ratio	Control		Description
	Key
Cinema	CINEMA			Select Cinema to view 2.35
				source material in its native
				aspect ratio.
				With a 16:9 screen and a
				non-CineWide projector (no
		2.35:1 Image on		anamorphic lens), the upper
		16:9 Screen		and lower portions of the
		(without CineWide)
				screen are masked, but the
				geometry of the active
				image area is unchanged.
				With a 2.35:1 screen and a
		2.35:1 Image on		CineWide-equipped
				projector, the projector
		2.35:1 Screen
				enlarges the 2.35:1 image so
		(with CineWide)
				that the active image area
				fills the 16:9 chip surface,
				eliminating the black bars.
				The secondary anamorphic
				lens then vertically
				compresses the image to fit
				a 2.35:1 screen.
Cinema Fill	C-FILL			A 16:9 image is scaled
				NON-linearly (more on the
		16:9 IImage on		sides than in the center) to
		22..35:1 Screen		fit a 2.35:1 screen.
				Cinema Fill is available only
		16:9 Image on		on the Vision 30/CineWide
				and Vision 30ET/CineWide.
		2.35:1 Screen with
		Cinema Fill

SD Enhance: The SD Enhance menu gives you options for improving the quality of standard-definition, 480i images. (For 480p and higher-definition images, the controls in this menu are disabled.) Keep in mind that these controls add frequencies that are not present in the original signal, and may make images appear “noisy” if misused.

•H Enhance/V Enhance: These controls can improve the apparent horizontal and/or vertical resolution of the image.

•Chroma Enhance: This control adds chroma (color information) to the input signal and can make colors appear more vibrant and saturated.

•H Threshold/V Threshold/Chroma Threshold: Set these to +11 or higher to activate the enhancement controls described above. Generally, the higher the threshold, the more noticeable the enhancements you make will be.

Vidikron Vision 30 Series Owner’s Operating Manual 43