Electrolux 86741 manual Washing Programme Progress, Programme progress display, Multi display

Page 25

Operating Instructions

Washing Programme Progress

Programme progress display

Prior to the start, the programme steps chosen are displayed by the Programme progress display. During the washing programme the current programme step is displayed.

	Multi display
	The expected time remaining (in minutes)
	up to the end of the programme is shown


	in the Multi display.
3	The multi display indicates the estimated duration, in minutes, of the
	programme. These timings are estimates and can vary according to in-

coming water temperature, type and quantity of laundry, out of bal- ance spin detection and foam detection. During the programme countdown, the remaining time can be recalculated due to any of the above factors.

Changing spin speed

During the washing programme, the spin speed can still be changed or RINSE HOLD can be set.

Other settings cannot be changed.

Stopping the programme

0Turn the progamme selector to OFF in order to stop the washing prematurely.

3	The programme can be interrupted at any time with the START/PAUSE
	button and can be continued again by pressing this button again.

25

Image 25

Contents ÖKO-LAVAMAT 86741 update Pages of this instruction book Dear CustomerFuture owners ApplianceContents Installation and connection instructions Page Prior to initial start-up SafetyIntended Use General Safety Child SafetyDisposal When disposing of the washing machineEnvironmental tips PackagingFront view Description of the ApplianceDetergent dispenser drawer Programme selector Control PanelSilk / P Handwash Wool / P HandwashPRE-WASH Pre-wash/Soaking Programme Option ButtonsTime Saver Programmable functionsWash Time Display Consumption Values and Programme TimesRation, in minutes, of the programme Anti-flood Aqua Control + Aqua Alarm What does Update mean?Preparing for a wash cycle Before the first washSorting and preparing the washing Types of washing and care symbols Water softening How much detergent and conditioner?Water hardness details Running a washing cycle Setting the wash programmeBrief instructions After the washing programme has endedJusted to suit the washing programme Changing Spin Speed /selecting RinseWool / PHandwash SILK/ PHandwashSoaking duration Setting the delay timer/soaking duration Delay timerLoading the washing Opening and closing the doorDetergents and conditioners Adding detergent/conditionersFor use with the Stain programme option only Compartment for main wash deter- gentIf a delay start has been set If using liquid detergents/tabletsStarting the wash programme Firmly closed and press the START/PAUSE button againProgramme progress display Washing Programme ProgressMulti display Changing spin speedWashing cycle complete/Removing the washing Not function if the power supply is interruptedWashing Programme TablesSeparate Spinning Separate Rinse/Conditioning/Starching/TreatingMaintenance and Cleaning To run a maintenance wash Maintenance WashWashing Machine Drum Main doorBefore cleaning the drain pump Cleaning the drain pumpWhat to do if Trouble ShootingLow Been removed Connection instructions Appliance is Rinse water is If there are still grey stains on the washing If the washing results are not satisfactoryIf after the last rinse foam is still visible If there are white residues on the washingHave a flat container on hand to catch the water Carrying out an emergency emptyingUnlock feature When the water is completely drainedEmergency unlocking of the door Supply firstAdditional rinse cycle RINSE+ To cancel the additional rinseHelpful to rinse with extra water To set the additional rinseWater cooling To cancel water coolingAdditional rinse cycle and water cooling To set the water cooling functionVariomatic spin To cancel Variomatic SpinTo set Variomatic Spin Cancelling the Programme Protection Setting the Programme ProtectionProgramme Protection Cancelling the child safety feature Child Safety FeatureWashing programme can be StartedInstallation Safety Precautions Installation and connection instructionsWhen transporting the unit with a sack trolley Installation of the applianceTransporting the appliance Remove transport packagingCover the hole with the cap G Installation on a Suspended Floor Installation-Site preparationLevelling the appliance Measures not be observed Electrical ConnectionEarth Blue Neutral Brown Live Disposed of safelyPermanent Connection Water pressure Water connectionConnection to the machine Inlet Hose ConnectionWater Drainage Pump head of greater than 1m Dimensions Technical DataHeight adjustment About +10/-5mm Dimensions in mmGreat Britain Warranty conditionsPage Index 0870 5 929 Help us to help you Service & Spare PartsPNC Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG