Operating Instructions
What to do if...
Trouble Shooting
If the appliance is not working correctly, please carry out the following checks before contacting your local Service Force Centre. Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is in guarantee.
• If the fault code C1 oder C2 is shown in the
low).
After clearing the fault, press the START/PAUSE button. If the fault code is shown again, contact your local Service Force Centre.
•For all other faults displayed in the
Problem | Possible cause | Remedy | |
| The mains plug is not | Plug in the mains plug. | |
| plugged in. | ||
|
| ||
| The house fuse has blown. | Replace the fuse. | |
Washing machine does | Door is not properly closed. | Close door; Lock must en- | |
not work. | |||
gage audibly . | |||
|
| ||
| START/PAUSE button has not | Keep the START/PAUSE but- | |
| ton pressed until the pro- | ||
| been pressed long enough. | gramme starts. | |
|
| ||
| Child safety feature is | Cancel child safety feature | |
Door cannot be closed. | (see section „Child safety | ||
switched On. | |||
| feature“). | ||
|
| ||
| Water tap is closed. | Open water tap. | |
Water is not entering. | Filter in the socket of the in- | Close water tap. Disconnect | |
hose from water tap, remove | |||
Error code (1 ap- | let hose connection is | filter and clean under | |
blocked. | |||
pears. | running water. | ||
| |||
| Water tap is blocked with | Check the water tap and | |
| limescale or is faulty. | have it reaired if necessary. | |
|
|
|
32