Operating Instructions
When the additional rinse function is selected, the RINSE+ indicator on the program progress display illuminates prior to program start and during the additional rinse.
4.If you wish to check whether the additional rinse function is selected:
–Turn the program selector to SHORT SPIN.
–Press the SOAKING button briefly.
If RINSE+ flashes on the program progress display, the additional rinse function is set.
Disabling the Additional Rinse Function:
0 1. Turn the program selector to SHORT SPIN.
2.Press the SOAKING button for at least 5 seconds.
As soon as the button is pressed RINSE+ flashes on the program progress display. After 5 seconds RINSE+ ceases to flash and illumi- nates continuously for a further 5 seconds.
3.Whilst RINSE+ is continuously illuminated, release the SOAKING
button.
Once RINSE+ has ceased to illuminate, the additional rinse function is disabled.
Wash-Water Cooling
3The water is cooled prior to pumping out at the end of the main wash (by adding cold water). This setting is only effective for COTTON/LINEN at a temperature of over 40° C.)
Select
0 1. Turn the program selector to SHORT SPIN.
2.Press the PRE WASH button for at least 5 seconds.
After the button has been kept pressed for 5 seconds, MAINWASH flashes on the program progress display for 5 seconds.
3.Whilst MAINWASH is flashing, release the PRE WASH button.
After blinking has stopped,
4.If you want to check and see if
–Turn the program selector to SHORT SPIN.
–Press the PRE WASH button briefly.
If MAINWASH flashes on the program progress display, the
35