Electrolux LAVAMAT 51635 manual Washing Machine Drum, Main door, Maintenance Wash

Page 27

Operating Instructions

7.Use a brush to clean the entire compartment area of the washing

machine, particularly also the nozzles on the top side of the compartment.

8.Set the detergent dispensing drawer into the guide tracks and push it in.

Washing Machine Drum

The washing machine drum is made from rust-free stainless steel. Any objects left in the laundry which are likely to rust can stain the drum.

Important! Do not clean the stainless steel drum with descaling agents containing acids, scouring agents containing chlorine or iron, or steel wool. Your local AEG Service Force Centre has suitable agents available.

0Remove any rust stains on the drum using a stainless steel cleaning agent.

Maintenance Wash

3	With the use of low temperature washes it is possible to get a build up
	of residues inside the drum.

We recommend that a maintenance wash be performed on a regular basis.

To run a maintenance wash:

The drum should be empty of laundry. 0 1. Select the hottest cotton wash program.

2.Use a normal measure of detergent, must be a powder.

Main door

0Regularly check to see if there are deposits or foreign objects in the rubber seal behind the door, and remove them.

27

Image 27

Contents Lavamat Dear Customer Contents What to do if Separate SpinContents Safety Prior to initial start-upIntended Use General Safety Child SafetyPackaging When disposing of the washing machineDisposal Environmental tipsDescription of the Appliance Front viewDetergent Dispenser Drawer Control panel Program SelectorPrograms COTTONS/LINEN Programs WOOL/DELICATES EASY-CARES programsProgram Option Buttons Temperature SelectorStain ON/OFF ButtonBefore the First Wash Consumption Data and Wash TimesSorting and preparing a wash load Preparing a Wash LoadWashing Types and Care Symbols Water hardness scales Detergent and Conditioners Which detergent and conditioner?How much detergent and conditioner? Water SofteningLoading the washing When the wash program has endedRunning a Wash Cycle Brief instructionsCompartment for pre-wash agent/soaking agent If using liquid detergent/tabletsAdd detergent conditioner Compartment for in-wash stain treatmentSetting the Washing Program Starting the Washing Program Changing the Spin Speed/Selecting Rinse HoldProgram progress display Changing settingsWash Program Progress Changing/Interrupting the Washing ProgramOnce the program is completed Washing Cycle is complete/Removing WashingIf Soaking has been selected If Rinse Hold has been selectedWashing Program TablesSeparate Rinse Separate Conditioning/StarchingSeparate Spin Maintenance and Cleaning Main door Maintenance WashTo run a maintenance wash Washing Machine DrumCleaning the drain pump What to do if Trouble ShootingNot been removed Clean the detergent dis If there are white residues on the washing If the washing results are not satisfactoryIf there are still grey stains on the washing If after the last rinse foam is still visibleCarrying out an emergency emptying Child Safety Feature When the water is completely drainedCancelling the child safety feature Installation Safety Precautions Installation and Connection InstructionsInstallation of the appliance Transporting the applianceRemove transport packaging Installation and connection instructions Special spanner E Installation on a Suspended Floor Installation-Site preparationLevelling the Appliance Check that the appliance is level using a spirit levelMeasures not be observed Electrical ConnectionDisposed of safely Permanent ConnectionWater pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions Technical dataGreat Britain Warranty ConditionsPage Page Index Service & Spare Parts 0870 5 929 Help us to help youCustomer Care