Electrolux LAVAMAT 51635 manual Installation and connection instructions Special spanner E

Page 37

Installation and connection instructions

3	The special spanner (E) and the
	caps (D) (2 each) and (G) (1 each)

are supplied with it.

3. Remove the two screws (A) with the special spanner.

4. Remove the 4 screws (B).

5. Remove the transit bar (C).

6. Screw the 4 screws (B) back in for safe keeping.

7. Close the 2 large holes with the caps (D).

Important! When fitting the plastic caps, press until they snap into the rear panel securely.

8. Remove the screw F, including the

sleeve, compression spring and washer, with the special spanner E.

9. Cover the hole with the cap G.

Important! When fitting the plastic caps, press until they snap into the rear panel securely.

37

Image 37

Contents Lavamat Dear Customer Contents What to do if Separate SpinContents Prior to initial start-up SafetyIntended Use General Safety Child SafetyDisposal When disposing of the washing machineEnvironmental tips PackagingFront view Description of the ApplianceDetergent Dispenser Drawer Program Selector Control panelPrograms COTTONS/LINEN Programs WOOL/DELICATES EASY-CARES programsProgram Option Buttons Temperature SelectorStain ON/OFF ButtonBefore the First Wash Consumption Data and Wash TimesSorting and preparing a wash load Preparing a Wash LoadWashing Types and Care Symbols How much detergent and conditioner? Detergent and Conditioners Which detergent and conditioner?Water Softening Water hardness scalesRunning a Wash Cycle When the wash program has endedBrief instructions Loading the washingAdd detergent conditioner If using liquid detergent/tabletsCompartment for in-wash stain treatment Compartment for pre-wash agent/soaking agentSetting the Washing Program Starting the Washing Program Changing the Spin Speed/Selecting Rinse HoldWash Program Progress Changing settingsChanging/Interrupting the Washing Program Program progress displayIf Soaking has been selected Washing Cycle is complete/Removing WashingIf Rinse Hold has been selected Once the program is completedWashing Program TablesSeparate Conditioning/Starching Separate RinseSeparate Spin Maintenance and Cleaning To run a maintenance wash Maintenance WashWashing Machine Drum Main doorCleaning the drain pump What to do if Trouble ShootingNot been removed Clean the detergent dis If there are still grey stains on the washing If the washing results are not satisfactoryIf after the last rinse foam is still visible If there are white residues on the washingCarrying out an emergency emptying When the water is completely drained Child Safety FeatureCancelling the child safety feature Installation Safety Precautions Installation and Connection InstructionsTransporting the appliance Installation of the applianceRemove transport packaging Installation and connection instructions Special spanner E Installation on a Suspended Floor Installation-Site preparationLevelling the Appliance Check that the appliance is level using a spirit levelMeasures not be observed Electrical ConnectionDisposed of safely Permanent ConnectionWater pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions Technical dataGreat Britain Warranty ConditionsPage Page Index 0870 5 929 Help us to help you Service & Spare PartsCustomer Care