Electrolux LAVAMAT 51635 manual Permanent Connection, Disposed of safely

Page 41

 

Installation and connection instructions

1

WARNING! A cut off plug inserted into a 13 amp socket is a

 

serious safety (shock) hazard. Ensure that the cut off plug is

disposed of safely.

Permanent Connection

In the case of a permanent connection it is necessary that you install a double pole switch between the appliance and the electricity supply (mains), with a minimum gap of 3 mm between the switch contacts and of a type suitable for the required load in compliance with the current electrical regulations.

The switch must not break the yellow and green earth cable at any point.

;This appliance is in accordance with the following EU Guidelines:

Low Voltage Guidelines 73/23 EEC dated 19 February 1973, include Guideline Change Notice 93/68 EEC

EMC Guideline 89/336 EEC dated 3 May 1989, including Guideline Change Notice 92/31 EEC.

 

This appliance complies with the requirements laid out in the EEC

 

Directive 76/899.

 

Voltage 240 V AC: Fuse rating 13 amps

 

See rating plate for further information.

 

This appliance meets VDE requirements.

 

Particular regulations of local electricity authorities must be observed.

 

This appliance conforms to EEC Directive No. 82/499/EWG on radio

 

interference.

1

WARNING! Repairs to electrical appliances must only be carried out by

 

trained personnel. Improper repairs may lead to serious risks for the

user.

41

Image 41
Contents Lavamat Dear Customer Contents What to do if Separate SpinContents Intended Use SafetyPrior to initial start-up General Safety Child SafetyDisposal When disposing of the washing machineEnvironmental tips PackagingDetergent Dispenser Drawer Description of the ApplianceFront view Programs COTTONS/LINEN Control panelProgram Selector Programs WOOL/DELICATES EASY-CARES programsProgram Option Buttons Temperature SelectorStain ON/OFF ButtonBefore the First Wash Consumption Data and Wash TimesSorting and preparing a wash load Preparing a Wash LoadWashing Types and Care Symbols How much detergent and conditioner? Detergent and Conditioners Which detergent and conditioner?Water Softening Water hardness scalesRunning a Wash Cycle When the wash program has endedBrief instructions Loading the washingAdd detergent conditioner If using liquid detergent/tabletsCompartment for in-wash stain treatment Compartment for pre-wash agent/soaking agentSetting the Washing Program Starting the Washing Program Changing the Spin Speed/Selecting Rinse HoldWash Program Progress Changing settingsChanging/Interrupting the Washing Program Program progress displayIf Soaking has been selected Washing Cycle is complete/Removing WashingIf Rinse Hold has been selected Once the program is completedWashing Program TablesSeparate Spin Separate RinseSeparate Conditioning/Starching Maintenance and Cleaning To run a maintenance wash Maintenance WashWashing Machine Drum Main doorCleaning the drain pump What to do if Trouble ShootingNot been removed Clean the detergent dis If there are still grey stains on the washing If the washing results are not satisfactoryIf after the last rinse foam is still visible If there are white residues on the washingCarrying out an emergency emptying Cancelling the child safety feature Child Safety FeatureWhen the water is completely drained Installation Safety Precautions Installation and Connection InstructionsRemove transport packaging Installation of the applianceTransporting the appliance Installation and connection instructions Special spanner E Installation on a Suspended Floor Installation-Site preparationLevelling the Appliance Check that the appliance is level using a spirit levelMeasures not be observed Electrical ConnectionDisposed of safely Permanent ConnectionWater pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions Technical dataGreat Britain Warranty ConditionsPage Page Index Customer Care Service & Spare Parts0870 5 929 Help us to help you