Electrolux LAVAMAT 51635 manual Installation and Connection Instructions

Page 35

Installation and connection instructions

INSTALLATION AND CONNECTION INSTRUCTIONS

Installation Safety Precautions

•When moving do not tilt the washing machine onto its front or onto its right hand side (viewed from the front). This is to prevent the pos- sibility of the electronic components becoming wet.

•Before installation inspect the machine for transport damage. Do not connect the appliance if it is damaged - contact your retailer.

•Ensure all packaging and transit bolts/bars have been removed, see „Removal of Transit Packaging“. Failure to remove transit bolts/bars may cause serious damage to the appliance or property.

•Always insert the plug into a correctly installed earthed socket.

•Any plumbing work required to install this appliance should be carried out by a plumber or competent person.

•Check that the electricity supply is the same as that indicated on the appliance´s rating plate.

•Any electrical work required to install this appliance should be carried out by an electrician or competent person.

35

Image 35

Contents Lavamat Dear Customer Contents What to do if Separate SpinContents Intended Use SafetyPrior to initial start-up General Safety Child SafetyPackaging When disposing of the washing machineDisposal Environmental tipsDetergent Dispenser Drawer Description of the ApplianceFront view Programs COTTONS/LINEN Control panelProgram Selector Programs WOOL/DELICATES EASY-CARES programsProgram Option Buttons Temperature SelectorStain ON/OFF ButtonBefore the First Wash Consumption Data and Wash TimesSorting and preparing a wash load Preparing a Wash LoadWashing Types and Care Symbols Water hardness scales Detergent and Conditioners Which detergent and conditioner?How much detergent and conditioner? Water SofteningLoading the washing When the wash program has endedRunning a Wash Cycle Brief instructionsCompartment for pre-wash agent/soaking agent If using liquid detergent/tabletsAdd detergent conditioner Compartment for in-wash stain treatmentSetting the Washing Program Starting the Washing Program Changing the Spin Speed/Selecting Rinse HoldProgram progress display Changing settingsWash Program Progress Changing/Interrupting the Washing ProgramOnce the program is completed Washing Cycle is complete/Removing WashingIf Soaking has been selected If Rinse Hold has been selectedWashing Program TablesSeparate Spin Separate RinseSeparate Conditioning/Starching Maintenance and Cleaning Main door Maintenance WashTo run a maintenance wash Washing Machine DrumCleaning the drain pump What to do if Trouble ShootingNot been removed Clean the detergent dis If there are white residues on the washing If the washing results are not satisfactoryIf there are still grey stains on the washing If after the last rinse foam is still visibleCarrying out an emergency emptying Cancelling the child safety feature Child Safety FeatureWhen the water is completely drained Installation Safety Precautions Installation and Connection InstructionsRemove transport packaging Installation of the applianceTransporting the appliance Installation and connection instructions Special spanner E Installation on a Suspended Floor Installation-Site preparationLevelling the Appliance Check that the appliance is level using a spirit levelMeasures not be observed Electrical ConnectionDisposed of safely Permanent ConnectionWater pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions Technical dataGreat Britain Warranty ConditionsPage Page Index Customer Care Service & Spare Parts0870 5 929 Help us to help you