2.Pull out the detergent divider from its position (A).
A
3.Put it into the special guides in the mid- dle of the compartment for the washing phase.
When you use the detergent divider:
–Do not use gelatinous or thick liquid detergents.
–Do not put more liquid detergent than the edge of the detergent divid- er.
–Do not set the prewash phase.
–Do not set the delay start function, if it is available.
4.Measure out the detergent and the fab- ric conditioner.
5.Carefully close the detergent dispenser.
SETTING AND STARTING A
PROGRAMME
1.Turn the programme knob and set the washing programme.
2.The Start button indicator is off.
3.Set the available functions.
When you press the relevant button, the indicator of the set function comes on.
electrolux 11
4.Press the Start button to start the pro- gramme until the button indicator is on.
CANCEL A PROGRAMME
1. Turn the programme knob to to cancel the programme and to deacti- vate the appliance.
2.Turn the programme knob again to ac- tivate the appliance. Now, you can set a new washing programme.
The appliance does not drain the wa- ter.
CHANGE A FUNCTION
You can change only the delay and spin function before they operate.
Press the related button to set the new val- ue.
SET THE DELAY START
1.Press the delay start button again and again until the display shows the num- ber hours.
2.Press the start button, the appliance starts the countdown of the delay start. The symbol h flashes in the display and the start button indicator is off.
When the countdown is completed, the programme starts automatically and the start button indicator comes on.
You can cancel or change the set of the delay start also when the appliance starts the countdown.
CANCEL THE DELAY START
Press the delay start button again and again until the display shows 0.
The programme starts and the start button indicator comes on.
OPEN THE DOOR
While a programme operates, the appliance door is locked.
To open the appliance door:
1. Turn the programme knob to to de- activate the appliance.
2.Wait for some minutes before to open the appliance door.
3.Close the appliance door.
4.Set the programme again.