14electrolux
3.Unscrew the filter to let the water flow out.
9.Make sure that you tighten correctly the filter to prevent leakages.
1 2 
4.When the container is full of water, screw the filter again and empty the container. Do steps 3 and 4 again and again until no more water flows out from the drain pump.
5.Unscrew the filter and remove it.
1
2
6.Remove fluff and objects from the pump.
7.Make sure that the impeller of the pump can turn. If this does not occur, contact the service centre.
10. Close the drain pump door.
CLEAN THE INLET VALVE FILTER
It could be necessary to clean the filter when:
•The appliance does not fill with water.
•The appliance fills with the water for a long time.
Warning! Disconnect the mains plug from the mains socket.
To clean the filter:
1.Close the water tap.
2.Remove the inlet hose behind the appli- ance.
3.Clean the filter in the valve with a stiff brush or a towel.
8.Clean the filter under the water tap and put it back in the pump.