6electrolux
DISPLAY 2
A B C D
The display shows:
A• The delay start
When you press the delay start button, the display shows the delay start time.
B• The default spin speed of the pro- gramme.
• 'No Spin' (00).
C• The display symbols.
The symbols appear on the display when the related function is set.
D• The programme time
•Alarm codes
If the appliance has a malfunction, the display shows alarm codes. Refer to 'Troubleshooting' chapter.
•End
It comes on when the programme is completed.
START BUTTON 3
Press this button to start a programme.
EASY IRON BUTTON 4
Press this button to prevent the creases in the fabrics. When you press this button, the appliance decrease the intensity of the washing phase and spin speed. Automatically, the spin speed is set to 500 rpm.
Set this function to iron the laundry easily and quickly.
EXTRA RINSE BUTTON 5
Press this button to add rinsing phases to a programme.
Use this function for persons allergic to de- tergents and in areas where the water is soft.
RINSE HOLD BUTTON 6
Press this button to activate the 'Rinse Hold' function.
Set this function to prevent fabric creases. The appliance does not drain the water when the programme is completed.
To drain the water refer to ‘At the end of the programme’.
PREWASH BUTTON 7
Press this button to add a prewash phase at 40° C before the washing programme. We recommend that you use this function when you have laundry with a high level of soil.
The set of this function increases the programme duration.
SPIN BUTTON 8
Press this button to:
•Decrease the maximum speed of the spin phase when you set a programme.
The display shows only the spin speeds available with the set pro- gramme.
• Deactivate the spin phase.
The spin phase is off.
DELAY START BUTTON 9
Press this button to delay the start of a pro- gramme from 1 hour to 16 hours.
Press this button again and again to set the correct delay start. The symbol h flashes until the start of the washing programme while the indicator of the Start is off.
When the programme starts the indicator of the Start comes on.
30 minutes after the set of the delay start, the light display comes off while the symbols of the functions set stay on.
Press one of the buttons or turn the programme knob to activate again the light display.