20electrolux
Installation
Unpacking
All transit bolts and packing must be re- moved before using the appliance.
You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again.
1.After removing all the packaging, carefully lay machine on it’s back to remove the polystyrene base from the bottom.
2.Remove the power supply cable and the draining and inlet hose from the hose holders on the rear of the appliance.
4. Slide out the relevant plastic spacers.
5.Fill the smaller upper hole and the two large ones with the corresponding plastic plug caps supplied in the bag containing the instruction booklet.
3. Unscrew the three bolts.