8electrolux
Select the available options by pressing buttons 2, 3 and 4
Depending on the programme, different functions can be combined. These must be selected after choosing the desired pro- gramme and before starting the programme. When these buttons are pressed, the corre- sponding pilot lights illuminate. When they are pressed again, the pilot lights go out. If an incorrect option is selected, the integrated red pilot light of the button 5 flashes 3 times.
For the compatibility among the washing programmes and the options see chap- ter «Washing Programmes».
Select the Delay Start by pressing button 6
Before you start the programme, if you wish to delay the start, press the button 6 repeat- edly, to select the desired delay. The relevant light illuminates.
You must select this option after you have set the programme and before you start the pro- gramme.
You can cancel or modify the delay time at any moment, before you press button 5 . Selecting the delayed start:
1.Select the programme and the required options.
2.Select the delay start by pressing the but- ton 6 .
3.Press button 5 :
–the machine starts its hourly count- down.
–The programme will start after the se- lected delay has expired.
Cancelling the delayed start after having star- ted the programme:
1.Set the washing machine to PAUSE by pressing button 5 .
2.Press button 6 once, the light relevant to the selected delay goes off
3.Press button 5 again to start the pro-
gramme.
The Delay Start can not be selected with DRAIN programme.
Important! The selected delay can be changed only after selecting the washing programme again.
The door will be locked throughout the delay time. If you need to open the door, you must set the machine to PAUSE (by pressing the button 5 ) and then wait a few minutes. After
you have closed the door, press the button
5again.
Start the programme by pressing button 5
To start the selected programme, press the button 5 , the corresponding green pilot light stops blinking. The pilot lights 7.1 and 7.2 illuminate to indicate that the appliance starts operating and the door is locked.
To interrupt a programme which is running, press the button 5 : the corresponding green pilot light starts blinking.
To restart the programme from the point at which it was interrupted, press the button 5 again . If you have chosen a delayed start, the machine will begin the countdown.
If an incorrect option is selected, the red pilot light of the button 5 blinks for 3 times.
Altering an option or a running programme
It is possible to change some options before the programme carries them out.
Before you make any change, you must PAUSE the appliance by pressing the button
5.
Changing a running programme is possible only by resetting it. Turn the programme se- lector dial to O and then to the new pro- gramme position. Start the new programme by pressing the button 5 again. The washing water in the tub will be not emptied out.
Interrupting a programme
Press the button 5 to interrupt a programme which is running, the corresponding green pilot light starts blinking.
Press the button again to restart the pro- gramme.
Cancelling a programme
Turn the selector dial to 
to cancel a pro- gramme which is running.
You can select now a new programme.
Opening the door
After the programme has started (or during the delay time) the door is locked, if you need to open it, set first the machine to PAUSE by pressing the button 5 . After a few minutes it will be possible to open the door.
If the door remains locked, this means that the machine is already heating or that the