User's instructions
Troubleshooting
The manufacturing process of your appliance has been subject to many checks. However, if you notice an operating fault, refer to the table below before calling the
After having removed the possible causes of the fault, press the START/ PAUSE button "" to restart the interrupted cycle. If the error code reappears or if the fault has not disappeared, contact the
Symptoms | Solutions |
|
|
The machine does not start. | Check that: |
| - the fuses are in good condition, |
| - the appliance is correctly connected, |
| - the lid of the appliance and the drum |
| flaps are properly closed, |
| - the Start/Pause button " " has been |
| pressed, |
| - there is not a power failure, |
| - the water tap is fully open, |
| - the water inlet filter is not blocked. |
The machine does not fill. | Check that: |
| - the water inlet tap is open and that |
| there is sufficient pressure, |
| - there is a water cut. |
The machine does not spin and/or | Check that: |
does not drain. | - the drain hose is not blocked or kinked, |
| - the drain pump filter is not blocked, |
| - the laundry load is correctly balanced in |
| the drum, |
| - the drain programme " " or the rinse |
| hold option " " have been selected. |
The END light flashes 4 times and an | - The lid is not closed properly. |
acoustic signal is emitted 4 times*. |
|
The END light flashes once and an | Check that: |
acoustic signal is emitted*. | - the water tap is not closed or blocked, |
| - the filter in the socket of the inlet hose |
| is not blocked. |
29