Electrolux 42230 manual Electrical connection

Installation and connection instructions

Electrical connection

Information about the mains power supply, the nature of the power and the fuses to be used are given on the washing machine name plate at the back of the washing machine.

If the washing machine is directly connected to the electrical installation (fixed connection), insert a two-pole switch with a contact opening distance of not less than 3 mm.

This washing machine can only be connected to 220-230 V single phase power supply.

Check that the subscriber’s meter and fuses are capable of carrying the current required by the washing machine, allowing for other electrical equipment connected at the same time.

Rating of line fuses (one for each phase): 10 A in 220-230 V single phase.

Important:

The installation shall comply with with the rules in force.

Use a power outlet with an earthing pin, which shall be connected according to the rules in force.

If the mains power supply cable has to be replaced, have the work done by the After Sales Service to make sure that it is done safely.

Make sure that the earthing connector is conform with the rules in force.

We cannot be held responsible if accidents or incidents are caused by a non-existent or defective earth.

36