Whirlpool LG9806XP manual Lint screen, Lint removal, Electric Dryers

Page 10

Lint screen

Clean the lint screen before each 1oad.A screen blocked by lint con increase drying time and may be o FIRE H

Ooen the lid and DUII the lint screen

ROLL the lint off the kreen

Lint removal

Lint con gather inside the dryer and create a fire hazard.This lint

should be removed every 2 to 3 years, or more often, depending on dryer usage.

Heat Element

ELECTRIC DRYERS

GAS DRYERS

Cleaning should be done

WARNING:
l	Avoid	electrical	shock
	hazard	- unplug	power
	supply cord or turn off
electrical	power.
l Avoid injury or damage			-do not
put hands	inside	cabinet.
l Make sure dryer is cool.

only by a qualified person.

1.Remove bock panel (electric) or lower access panel (gas).

2.Avoid damaging wires, thermostats, funnel or igniter.

3.Remove lint from shaded area - see art - with Q soft brush or vacuum cleaner.

4.Replace panel; reconnect and re-level dryer.

10

Image 10

Contents Automatic Dryers Contents For Your Safety l Your ResponsibilitiesTouch a Custom DRY Or Timed DRY Control To stop the dryer Power on SelectorTurn To check the loadPermanent PRESS, Synthetics and Blends Mediumweight CottonsType of Load Cottons Linens KnitsCool down times Operating instructionsTheCUSTOM DRY Controls Timed DRY ControlAIR Setting TL’MBLE Press Setting Finish GUARDControlEnd-of-cycle signal ? \’ Lint signalDrying times Mixed loads PERM’T Presvmed Using the drying rackFluff AIR Lint removal Lint screenElectric Dryers Cleaning Dryer Interior Vacation careChanging the drum light Before calling for Assistance.. ’ If you need AssistanceIf you need service If you have a problemPage 01985 Whirlpool Corporation