Whirlpool LG9806XP manual Changing the drum light

Page 12

Changing the drum light

1.Open the dryer door and remove light bulb cover by turning it clockwise.

3.Replace the bulb only with a

40-watt appliance bulb from most hardware, grocery or variety stores.

2.Remove the liaht bulb by turning it countercloc%wise.

4.Replace the light bulb cover and lock it in place by turning counterclockwise.

CAUTION: The bulb cover must be securely in place during dryer opera-

tion to prevent overheating and possible damage to fabrics. Operating the dryer with the bulb cover removed can cause the dryer to fail or create a FIRE HAZARD.

12

Image 12

Contents Automatic Dryers Contents For Your Safety l Your ResponsibilitiesPower on Selector TurnTouch a Custom DRY Or Timed DRY Control To stop the dryer To check the loadMediumweight Cottons Type of Load Cottons LinensPermanent PRESS, Synthetics and Blends KnitsOperating instructions TheCUSTOM DRY ControlsCool down times Timed DRY ControlAIR Setting TL’MBLE Press Setting Finish GUARDControlLint signal End-of-cycle signal ? \’Drying times Mixed loads Using the drying rack PERM’T PresvmedFluff AIR Lint screen Lint removalElectric Dryers Cleaning Dryer Interior Vacation careChanging the drum light Before calling for Assistance.. ’ If you need AssistanceIf you need service If you have a problemPage 01985 Whirlpool Corporation