Operating instructions
TheCUSTOM DRY Controls
After touching a
IMPORTANT: If a finished load is 1 not as dry as you like:
1.Clear dryer memory by moving the POWER SWITCH to OFF then back to ON.
2.Touch the
3.Touch the 20 minute TIMED DRY Control
4.Remember to select a different dryness setting for the next similar load.
Cool down times
In all cycles, the heat shuts off before the dryer stops tumbling. This cool down time helps:
0 keep wrinkles from setting in.
l make handling the hot load items easier.
/
A sensor on the backof the dryer drum “feels” the amount of moisture in the load. When the dryness you have selected is reached, the
dryer automatically shuts off.
You may need to try different dryness settings to find the one you like.
SUGGESTIONS
l For the first few loads, use NORMAL DRY. When finished, check to see if the load is as dry as you want.
l If the load is not as dry as you like, use MORE DRY or VERY DRY the next time.
lIf the load is too dry, use LESS DRY the next time. Use DAMP DRY if you plan to iron the clothes when you remove them from the dryer.
l Use a TIMED DRY setting for bed- spreads, quilts, blankets and other bulky loads. Start with 60 minutes.
TIMED DRY Control
After touching a
utes you want: 20,30.40,60, or 80. This setting is good for very small
loads or large, bulky items.
Note the cool down times in each cycle.
fli
Includes | 5 minute | Includes | 10 minute |
cool | down | cool | down |
6