Electrolux 60840 L, 62840 L Select the START/PAUSE Button, Select the Delay Start Button

Page 12

12Daily use

Select the START/PAUSE (Button 8)

To start the selected programme, press the button 8 , the corresponding red pilot light stops blinking.

The pilot light 10.1 is on to indicate that the appliance starts operating. The pilot light 10.2 is on to indicate the door is locked.

To interrupt a programme which is running, press the button 8 : the corresponding red pilot light starts blinking.

To restart the programme from the point at which it was interrupted, press the button 8 again. If you have chosen a delayed start with button 9 , the machine will begin the count- down. If an incorrect option is selected, the yellow pilot light of the button 8 blinks for 3 times the message Err is displayed for about 2 seconds.

Select the DELAY START (Button 9)

Before you start the programme , if you wish to delay the start, press the button re- peatedly, to select the desired delay.

The selected delay time value (up to 20 hours) will appear on the display for about 3 seconds, then the duration of the programme will appear again.

You must select this option after you have set the programme and before you press the button 8 .

The wash programme can be delayed from 30 min - 60 min - 90 min, 2 hours and then by 1 hour up to a maximum of 20 hours by means of this button.

If you wish to add laundry in the machine during the delay time you will press button 8 to put the machine in pause. Add the laundry, close the door and press button 8 again. Selecting the delayed start.

Select the programme and the required options.

Select the delay start.

Press button 8 : the appliance starts its hourly countdown. The programme will start after the selected delay has expired.

Cancelling the delayed start

Set the washing machine to PAUSE by pressing the button 8 ;

Press button 9 once until the symbol ’ is displayed;

Press the button 8 again to start the programme.

• The selected delay can be changed only after selecting the washing programme again.

The door will be locked throughout the delay time. If you need to open the door, you must first set the washing machine to PAUSE by pressing the button 8 . After you have closed the door, press the button 8 again.

The button 9 can not be selected with DRAIN programme.

Select an additional rinse ( EXTRA RINSE )

This appliance is designed for saving water. However, for people with a very delicate skin (allergic to detergents) it may be necessary to rinse the laundry using an extra quantity of water.

Press simultaneously buttons 2 and 3 for some seconds: the pilot light 10.3 comes on. This function stays permanently on. To remove it press the same buttons again until the pilot light 10.3 goes off.

Image 12
Contents Lavamat 60840 L 62840 L Contents Safety information General safetySafety information Installation Child SafetyUse Product description Control panel Drain pump Adjustable feet Control panelDetergent dispenser drawer START/PAUSE button Delay Start button Delay StartDisplay DisplayIndicator pilot lights Acoustic signalsChild safety lock First use Daily use Load the laundry Measure out the detergent and the fabric softener Select the desired Temperature Button Daily useSelect the Spin speed or the Rinse Hold option Button Programme option buttonsSelect the Stain option Button Sensitive option ButtonSelect the Delay Start Button Select the START/PAUSE ButtonSelect an additional rinse Extra Rinse Cancelling a programme Altering an option or a running programmeInterrupting a programme Opening the door after the programme has startedHelpful hints and tips Sorting out the laundryBefore loading the laundry Removing stainsDetergents and additives Quantity of detergent to be usedDegrees of water hardness Washing programmes Washing programmesEasy Iron Care and cleaning Care and cleaningDescaling Maintenance wash External cleaningAfter each wash Washing drumDoor seal Drain pumpPage Cleaning the water inlet filters Frost precautions Emergency emptying outTurn on the water tap What to do if… What to do if…Drain hose is squashed or kinked Machine vibrates or is noisy Technical data InstallationConsumption values UnpackingInstallation Installation Slide out the relevant plastic spacers Positioning and levelling Water inletWater-stop device Water drainageBe sure to tighten the ring nut again to prevent leaks ApplianceElectrical connection Environment concerns Packaging materialsEcological hints Page Page 132951561-00-122010