Display 7
7DISPLAY
8START/PAUSE button
9DELAY START button
10Indicator pilot lights Symbols : 
Rinse Hold, 
Cold
Display
7.2 |
7.3 |
Duration of selected programme (7.1) :
Duration of selected programme: After selecting a programme, the duration is displayed in hours and minutes (for example 2.05 ). The duration is calculated automatically on the basis of the maximum recommended load for each type of fabric. After the programme has started, the time remaining is updated every minute.
Alarm codes
In the event of operating problems, some alarm codes can be displayed, for example 
(see chapter «What to do if...»).
End of programme
When the programme has finished a blinking zero 
is displayed, the DOOR pilot light
( 10.2 ), the WASHING pilot light ( 10.1 ) and the pilot light of button 8 go out. The door can be opened.
Incorrect option selection
If an option which is not compatible with the set wash programme is selected, the message Err is displayed for a few seconds and the yellow pilot light of button 8 light starts blinking.
Delay Start (7.2)
The selected delay (20 hours max) set by means of the relevant button appears on the display for a few seconds, then the duration of the previously selected programme is dis- played. The symbol 7.2 will appear on the display. The delay time value decreases by one unit every hour. When only 1 hour remains, the time decreases every minute.