| Options | |
EN | ||
The options allow for customising the selected programme according to one’s own needs. | ||
| Timed drying | |
| ||
| After selecting a programme, press the “Timed drying” button to enter a drying time. Every time this button is pressed, the duration of | |
| the selected drying cycle appears on the display. When pressed the first time, the highest allowed value for the selected cycle appears | |
| on the display. When pressed each of the following times, the set time is reduced until OFF appears. | |
| The buzzer will activate if the timed drying option is not available. | |
| The selected time is displayed after the start of the programme and cannot be modified after pressing the START/PAUSE button. | |
| Delay Start | |
| The start of some programmes (see Programmes and options) may be delayed up to 24 hours. Press the button repeatedly to enter | |
| the desired delay time. Before setting a delayed start, make sure that the water container is empty and that the filter is clean. | |
| Pre | |
| When this option is selected in addition to the “Delay start” option, the drum rotates garments at intervals during the delay period to | |
| avoid creases forming. | |
| Post | |
| When this option is selected, the drum rotates garments at intervals after the COOL drying cycle has ended, in order to avoid crea- | |
| ses forming on garments if they cannot be immediately removed at the end of the programme. During this phase, the indicator light | |
| is turned on. | |
| High Heat | |
| When a drying time is selected, pressing this button sets a high heat drying and the indicator light above the button lights up. The | |
| timed programmes are | |
| Alarm | |
| A buzzer sounds at the end of the drying cycle to signal that the programme has ended and the garments are ready to be removed. | |
| Not all options are available on all programmes (see Programmes and options). If the button of an unavailable option is pressed, the | |
| buzzer emits three signals. If an option is available, a single buzzer signal sounds and the option indicator light next to the button | |
| lights up to confirm the selected option. |
Opening the door
If the door is opened (or the START/PAUSE button is pressed) while a programme is running, the dryer stops and the following may occur:
• The START/PAUSE button flashes orange.
• When a delayed start is running, the delay countdown continues. It is necessary to press the START/PAUSE button to resume the “Delay start” programme. The “Delay start” indicator light flashes and the display visualises the time remaining to the start of the selected programme.
• It is necessary to press the START/PAUSE button to resume the programme. The progress indicator lights signal the running pha- se and the START/PAUSE indicator light stops flashing and turns green.
• During the post
• By turning the Programme selection knob, a new programme is selected and the START/PAUSE indicator light flashes green. This procedure can be used to select the COOL drying programme to cool garments if they are judged to be dry enough.
Press the START/PAUSE button to start the new programme.
Note: If you have a power cut, switch off the power or remove the plug. When power is restored, plug in the machine, press and hold the ON/OFF button until the dryer reactivates, then press Start/Pause button.
10