Indesit IDCE 8450 B K, IDCE 8450 B S instruction manual

Page 3

Condenser unit - remove any fluff build-up
from the condenser on a monthly basis.	EN
	EN

Step 1

Open the condenser cover - grip the handle and pull towards you.

Step 2

Remove the condenser by turning the 3 catches, then pull the condenser towards you. (It is normal for some residual water to be left in the tubes).

Step 3

Clean the condenser with running water over the rear side to remove any fluff deposits.

Step 4

Replace the condenser unit; make sure that the unit is securely in place, that all 3 catches are fixed and that the position arrows on the front end of the condenser are pointing upwards.

Failure to clean the condenser unit may cause premature failure of the dryer.

3

Image 3

Contents Tumble Dryer Filling of the Water Container Important informationPage Electrical connections InstallationWhere to install the tumble dryer VentilationFeatures Description of the tumble dryerControl panel Sun icon Drying cycle Fan icon Cool air cycle See Indicator lightsStarting and selecting a programme How to carry out a drying cycleProgramme chart Programmes and optionsSpecial/Sport/Partial Programmes Page Opening the door OptionsLaundry Sorting laundryCare labels Special garments Drying timesAutomatic drying times Save energy and respect the environment SuggestionsCare and maintenance Dryer is overloaded see Laundry TroubleshootingProblem Possible causes / Solutions Door has not been closed properlyComparative programmes AssistanceSpare parts Information on recycling and disposalMonths Parts and Labour Guarantee GuaranteeManufacturer Engineer to callPage 195104929.00