JVC RX-E11S manual Specifications, Amplifier, FM tuner IHF, AM tuner, General

Page 40

Specifications

Specifications

Designs and specifications are subject to change without notice.

Amplifier

Output Power

At stereo operation:

 

Front channels:

60 W per channel*, min. RMS, both

 

channels driven into 6 at 1 kHz with no

 

more than 10% total harmonic distortion.

 

(IEC268-3)

At surround operation:

 

Front channels:

60 W per channel*, min. RMS, driven into

 

6 at 1 kHz with no more than 10% total

 

harmonic distortion.

Center channel:

60 W*, min. RMS, driven into 6 at

 

1 kHz, with no more than 10% total

 

harmonic distortion.

Surround channels: 60 W per channel*, min. RMS, driven into 6 at 1 kHz, with no more than 10% total harmonic distortion.

* Measured on AC 110 V, 127 V, 220 V, and 240 V.

Audio

Audio Input Sensitivity/Impedance:

 

DVR/DVD, VCR, DBS, TV:

170 mV/47 k

Audio Input (DIGITAL IN)*:

 

Coaxial: DIGITAL IN 1(DVR/DVD):

0.5 V(p-p)/75

Optical: DIGITAL IN 2(DBS), 3(VCR):

–21 dBm to –15 dBm (660 nm ±30 nm)

*Corresponding to Linear PCM, Dolby Digital, and DTS (with sampling frequency—32 kHz, 44.1 kHz, 48 kHz).

Audio Output Level

 

DVR, VCR:

170 mV

Signal-to-Noise Ratio (’66 IHF/DIN): 87 dB/62 dB

Frequency Response (6 ):

20 Hz to 20 kHz (±1 dB)

Bass Boost:

+4 dB ±1 dB at 100 Hz

Equalization:

 

Center frequency:

63 Hz, 250 Hz, 1 kHz, 4 kHz, 16 kHz

Control range:

±8 dB

Video

Video Input Sensitivity/Impedance:

Composite video: DVR/DVD, VCR, DBS:

 

1 V(p-p)/75

S-video: DVR/DVD, VCR, DBS:

 

Y (luminance):

1 V(p-p)/75

C (chrominance, burst):

0.3 V(p-p)/75

Video Output Level/Impedance:

 

Composite video: DVR, VCR, MONITOR OUT:

 

1 V(p-p)/75

S-video: DVR, VCR, MONITOR OUT:

Y (luminance):

1 V(p-p)/75

C (chrominance, burst):

0.3 V(p-p)/75

Synchronization:

Negative

FM tuner (IHF)

Tuning Range:

87.50 MHz to 108.00 MHz

Usable Sensitivity:

 

Monaural:

12.8 dBf (1.2 µV/75 )

50 dB Quieting Sensitivity:

 

Monaural:

16.0 dBf (1.7 µV/75 )

Stereo:

37.5 dBf (20.5 µV/75 )

Stereo Separation at Rec Out:

35 dB at 1 kHz

AM tuner

Tuning Range:

531 kHz to 1 602 kHz (at 9 kHz intervals)

 

530 kHz to 1 600 kHz (at 10 kHz intervals)

General

Power Requirements:

AC 110 V/127 V/220 V/230 V – 240 V ,

 

adjustable with the voltage selector,

 

50 Hz/60 Hz

Power Consumption:

120 W (at operation)

 

5 W (in standby mode)

Dimensions (W x H x D): 435 mm x 70 mm x 325 mm

Mass:

5.6 kg

38

Image 40
Contents RX-E11S US, UN, UXRX-E11S Front Stand height 15 cm or more FloorTable of Contents Remote control TUNING, FM MODE, Tuning 9, MemoryParts identification AUDIO, DVR/DVD , VCR , DBS , TVRear panel Display windowFront panel Before Installation Putting batteries in the remote controlChecking the supplied accessories Setting the voltage selectorConnecting the FM and AM antennas AM antenna connectionFM antenna connection FM antenna suppliedConnecting the speakers Connecting the subwooferSpeaker Layout Diagram Connecting the front, center, and surround speakersConnecting video components Connecting a TVConnecting a DVD recorder or DVD player Not suppliedConnecting a VCR Connecting a DBS tunerVideo cable Cable not suppliedConnecting the power cord Digital connectionTurn on the power To turn off the power into standbySelecting the analog or digital input mode Basic operationsSelecting the digital decode mode Adjust the volumeListening with headphones Adjusting the subwoofer audio position Turning off the sounds temporarilyChanging the display brightness Press Dimmer repeatedlyTurning off the power with the Sleep Timer Basic adjustment of auto memorySignal and speaker indicators on the display From the remote control only Press Sleep repeatedlyBasic settings From the remote control onlyTake your position where you listen to the sound When your clapping sound is detected successfullyBasic setting items Setting the speakers Operating procedureSetting subwoofer information-SUBWOOFER Setting bass sound Setting the speaker distanceSetting subwoofer output-SUBWFR OUT Setting the crossover frequency-CROSS OverSetting the virtual surround back speaker-VIRTUAL SB Using the Midnight modeFrom the remote control Selecting the main or sub channelDVR/DVD DBSVCR Auto SR onSound adjustments Basic adjustment itemsPress Adjust Turn Multi JOG to adjust the selected itemAdjusting the center tone-CENTER Tone Adjusting speaker output levelAdjusting the effect level for DSP modes-EFFECT Adjusting the bass sounds Selecting the subwoofer sound phase-SBWFR PhaseAttenuating the input signal-INPUT ATT Reinforcing the bass-BASS BoostTuning in to stations manually Using preset tuningTo store the preset stations Tuner operationsSelecting the FM reception mode To tune in a preset stationFrom the remote control Press FM or AM Press Tuner PresetCreating realistic sound fields Reproducing theater ambienceIntroducing the Surround modes Dolby Digital3D Headphone mode About other digital signalsDTS DTS Digital SurroundIntroducing the DSP modes All Channel Stereo mode ALL CH STDigital Acoustic Processor DAP modes Using the Surround/DSP modes To cancel Surround/DSP modesSelect and play any source you like If Auto Surrnd Auto Surround is set to onDolby D Dolby D HALL1/2, Live ClubDance CLUB, Pavilion DTS THEATER1/2, ALL CH ST.*2 DTS-ES Headphone Surrnd OFFAV Compu Link remote control system Connections 1 AV Compu Link connectionConnections 2 Video cable connection Monaural mini-plugs Not suppliedConnecting procedure Automatic selection of TV’s input modeAutomatic power on/off One-touch video playOperating other JVC products Turn on or off the TVTurn on or off the VCR Channel +DVD recorder or DVD player TOP MENU/MENUChanging the transmittable signals for operating a TV Operating other manufacturers’ productsRelease TV Try to operate your TV by pressing TVChanging the transmittable signals for operating a VCR Release VCRTry to operate your VCR by pressing VCR Manufacturers’ codes for VCRRelease DBS Try to operate your DBS tuner by pressing DBSManufacturers’ codes for DBS tuner Release DVR/DVDTroubleshooting PowerSound TunerSpecifications AmplifierFM tuner IHF AM tunerVictor Company of Japan, Limited 0105RYMMDWJEIN

RX-E11S specifications

The JVC RX-E11S is an exceptional integrated stereo receiver that artfully blends both performance and stylistic aesthetics, making it a popular choice for audiophiles and casual listeners alike. As a part of JVC's renowned line of audio equipment, the RX-E11S integrates the latest technologies to deliver an unparalleled listening experience.

At the heart of the RX-E11S is its robust power amplification system. It boasts an impressive output power rating, delivering clear and dynamic sound across a wide range of frequencies. Whether you are indulging in classical music, rock, or contemporary genres, the receiver maintains rich detail and clarity while providing sufficient power to drive a variety of speakers.

One of the standout features of the RX-E11S is its advanced digital signal processing technology. This allows for various sound enhancement options that cater to different listening environments and personal preferences. The receiver includes numerous preset equalizer settings and the capability to configure custom sound profiles, ensuring that users can achieve their desired sound signature.

The RX-E11S supports multiple audio inputs, including traditional analog connections and digital interfaces such as USB and optical inputs. This versatility enables seamless integration with a wide range of devices, from vinyl turntables to modern digital media players. The inclusion of Bluetooth technology also allows for wireless streaming from smartphones, tablets, or computers, providing users ease of access to their favorite playlists without the need for cumbersome cabling.

In terms of build quality, the JVC RX-E11S features a sleek and modern design that fits elegantly into any home audio setup. Its intuitive control layout includes a user-friendly interface, making it straightforward for users to navigate through settings and input selections. Additionally, the receiver houses a high-quality FM/AM tuner, allowing for easy access to a variety of radio stations.

The RX-E11S places a strong emphasis on flexibility and convenience, offering features such as a programmable timer and sleep function. This capability adds to the user experience, making it possible to enjoy music before bedtime or wake up to favorite tunes.

In summary, the JVC RX-E11S is a highly versatile and well-equipped stereo receiver that excels in delivering high-fidelity audio performance with modern technology. With its comprehensive features and elegant design, it serves as an excellent centerpiece for any home audio system. Whether you're an audiophile seeking precision sound or a casual listener looking for enjoyable listening sessions, the RX-E11S is poised to meet and exceed expectations.