JVC RX-E11S manual Getting started, Before Installation, Putting batteries in the remote control

Page 6

Getting started

Getting started

Before Installation

General precautions

•Be sure your hands are dry.

•Turn the power off to all components.

•Read the manuals supplied with the components you are going to connect.

Locations

•Install the receiver in a location that is level and protected from moisture and dust.

•The temperature around the receiver must be between –5˚C and 35˚C.

•Make sure there is good ventilation around the receiver. Poor ventilation could cause overheating and damage the receiver.

Handling the receiver

•Do not insert any metal object into the receiver.

•Do not disassemble the receiver or remove screws, covers, or cabinet.

•Do not expose the receiver to rain or moisture.

The receiver has a built-in cooling fan which operates while the receiver is turned on. Be sure to leave enough ventilation to obtain sufficient cooling effect.

CAUTION:

Do not connect the AC power plug to the wall outlet until all

connections are completed.

Putting batteries in the remote control

Before using the remote control, put two supplied batteries first.

1

2

3

1Press and slide the battery cover on the back of the remote control.

2Insert batteries.

Make sure to match the polarity: (+) to (+) and (–) to (–).

3Replace the cover.

If the range or effectiveness of the remote control decreases, replace the batteries. Use two R6(SUM-3)/AA(15F) type dry-cell batteries.

•Supplied butteries are for initial setup. Replace for continued use.

CAUTION:

Follow these precautions to avoid leaking or cracking cells:

•Place batteries in the remote control so they match the polarity:

(+) to (+) and (–) to (–).

•Use the correct type of batteries. Batteries that look similar may differ in voltage.

•Always replace both batteries at the same time.

•Do not expose batteries to heat or flame.

When using the remote control, aim the remote control directly at the remote sensor on the front panel.

Remote sensor

Checking the supplied accessories

Check to be sure you have all of the following supplied accessories. If anything is missing, contact your dealer immediately.

•Remote control (⋅ 1)

•Batteries (⋅ 2)

•AM loop antenna (⋅ 1)

•FM antenna (⋅ 1)

•Digital coaxial cable (⋅ 1)

•AC plug adaptor (⋅ 1) (not supplied for Saudi Arabia)

To operate the receiver, set the mode selector to “AUDIO/TV/VCR/DBS.”

Setting the voltage selector

Before connections, always do the following first if necessary.

Select the correct voltage in VOLTAGE SELECTOR on the rear of the receiver by using a screw driver.

•Check to be sure if the voltage mark is set to the voltage for your area where this unit plugs in.

VOLTAGE

SELECTOR

220V 110V

230 -

240V 127V

Voltage mark

4

Page 5 Page 7
Image 6
Page 5 Page 7
Contents RX-E11S US, UN, UXRX-E11S Front Stand height 15 cm or more FloorTable of Contents Parts identification Remote controlTUNING, FM MODE, Tuning 9, Memory AUDIO, DVR/DVD , VCR , DBS , TVDisplay window Rear panelFront panel Checking the supplied accessories Before InstallationPutting batteries in the remote control Setting the voltage selectorFM antenna connection Connecting the FM and AM antennasAM antenna connection FM antenna suppliedSpeaker Layout Diagram Connecting the speakersConnecting the subwoofer Connecting the front, center, and surround speakersConnecting a DVD recorder or DVD player Connecting video componentsConnecting a TV Not suppliedVideo cable Connecting a VCRConnecting a DBS tuner Cable not suppliedConnecting the power cord Digital connectionSelecting the analog or digital input mode Turn on the powerTo turn off the power into standby Basic operationsAdjust the volume Selecting the digital decode modeListening with headphones Changing the display brightness Adjusting the subwoofer audio positionTurning off the sounds temporarily Press Dimmer repeatedlySignal and speaker indicators on the display Turning off the power with the Sleep TimerBasic adjustment of auto memory From the remote control only Press Sleep repeatedlyTake your position where you listen to the sound Basic settingsFrom the remote control only When your clapping sound is detected successfullyBasic setting items Operating procedure Setting the speakersSetting subwoofer information-SUBWOOFER Setting subwoofer output-SUBWFR OUT Setting bass soundSetting the speaker distance Setting the crossover frequency-CROSS OverFrom the remote control Setting the virtual surround back speaker-VIRTUAL SBUsing the Midnight mode Selecting the main or sub channelVCR DVR/DVDDBS Auto SR onPress Adjust Sound adjustmentsBasic adjustment items Turn Multi JOG to adjust the selected itemAdjusting speaker output level Adjusting the center tone-CENTER ToneAdjusting the effect level for DSP modes-EFFECT Attenuating the input signal-INPUT ATT Adjusting the bass soundsSelecting the subwoofer sound phase-SBWFR Phase Reinforcing the bass-BASS BoostTo store the preset stations Tuning in to stations manuallyUsing preset tuning Tuner operationsFrom the remote control Press FM or AM Selecting the FM reception modeTo tune in a preset station Press Tuner PresetIntroducing the Surround modes Creating realistic sound fieldsReproducing theater ambience Dolby DigitalDTS 3D Headphone modeAbout other digital signals DTS Digital SurroundAll Channel Stereo mode ALL CH ST Introducing the DSP modesDigital Acoustic Processor DAP modes Select and play any source you like Using the Surround/DSP modesTo cancel Surround/DSP modes If Auto Surrnd Auto Surround is set to onDance CLUB, Pavilion Dolby DDolby D HALL1/2, Live Club DTS THEATER1/2, ALL CH ST.*2 DTS-ES Headphone Surrnd OFFConnections 2 Video cable connection AV Compu Link remote control systemConnections 1 AV Compu Link connection Monaural mini-plugs Not suppliedAutomatic power on/off Connecting procedureAutomatic selection of TV’s input mode One-touch video playTurn on or off the VCR Operating other JVC productsTurn on or off the TV Channel +DVD recorder or DVD player TOP MENU/MENURelease TV Changing the transmittable signals for operating a TVOperating other manufacturers’ products Try to operate your TV by pressing TVTry to operate your VCR by pressing VCR Changing the transmittable signals for operating a VCRRelease VCR Manufacturers’ codes for VCRManufacturers’ codes for DBS tuner Release DBSTry to operate your DBS tuner by pressing DBS Release DVR/DVDSound TroubleshootingPower TunerFM tuner IHF SpecificationsAmplifier AM tunerVictor Company of Japan, Limited 0105RYMMDWJEIN

RX-E11S specifications

The JVC RX-E11S is an exceptional integrated stereo receiver that artfully blends both performance and stylistic aesthetics, making it a popular choice for audiophiles and casual listeners alike. As a part of JVC's renowned line of audio equipment, the RX-E11S integrates the latest technologies to deliver an unparalleled listening experience.

At the heart of the RX-E11S is its robust power amplification system. It boasts an impressive output power rating, delivering clear and dynamic sound across a wide range of frequencies. Whether you are indulging in classical music, rock, or contemporary genres, the receiver maintains rich detail and clarity while providing sufficient power to drive a variety of speakers.

One of the standout features of the RX-E11S is its advanced digital signal processing technology. This allows for various sound enhancement options that cater to different listening environments and personal preferences. The receiver includes numerous preset equalizer settings and the capability to configure custom sound profiles, ensuring that users can achieve their desired sound signature.

The RX-E11S supports multiple audio inputs, including traditional analog connections and digital interfaces such as USB and optical inputs. This versatility enables seamless integration with a wide range of devices, from vinyl turntables to modern digital media players. The inclusion of Bluetooth technology also allows for wireless streaming from smartphones, tablets, or computers, providing users ease of access to their favorite playlists without the need for cumbersome cabling.

In terms of build quality, the JVC RX-E11S features a sleek and modern design that fits elegantly into any home audio setup. Its intuitive control layout includes a user-friendly interface, making it straightforward for users to navigate through settings and input selections. Additionally, the receiver houses a high-quality FM/AM tuner, allowing for easy access to a variety of radio stations.

The RX-E11S places a strong emphasis on flexibility and convenience, offering features such as a programmable timer and sleep function. This capability adds to the user experience, making it possible to enjoy music before bedtime or wake up to favorite tunes.

In summary, the JVC RX-E11S is a highly versatile and well-equipped stereo receiver that excels in delivering high-fidelity audio performance with modern technology. With its comprehensive features and elegant design, it serves as an excellent centerpiece for any home audio system. Whether you're an audiophile seeking precision sound or a casual listener looking for enjoyable listening sessions, the RX-E11S is poised to meet and exceed expectations.
Top Page Image Contents