JVC SP-THG61C Hdmi Connection, Resolution setting, Available resolution according to connection

HDMI Connection

About HDMI

HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for an easy all- digital output to an HDMI or DI-equipped TV.

Connection to an HDMI TV requires an HDMI cable while connection to a DVI-equipped TV requires a DVI adapter besides a HDMI cable.

HDMI has the capability to support standard, enhanced, or high-definition video plus standard to multi-channel surround-sound audio, HDMI features include uncompressed digital video, a bandwidth of up to 5 gigabytes per second, one connector (instead of several cables and connector), and communication between the AV source and AV devices such as DTVs.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC.

If you have a HDMI TV or monitor, you can connect it to this DVD/CD Receiver using a HDMI cable.

1.Connect the HDMI OUT jack on the DVD/CD Receiver to the HDMI jack on a HDMI compatible TV or monitor (H).

2.Set the TV’s source to HDMI (refer to owner’s manual for TV).

Notes on HDMI Out connection

•If your TV does not accept your resolution setting, abnormal picture appears on the screen.(“TV do not support” will appears in screen)

Please read owner’s manual for TV, and then set the resolution that your TV can accept.

•Changing the resolution when the unit is connected with HDMI connector may result in malfunctions. To solve the problem, turn off the unit and then turn it on again.

•When you connect a HDMI or DVI compatible device make sure of the following :

-Try switching off the HDMI/ DVI device and this unit. Next, switch on the HDMI/ DVI device and leave it for around 30 seconds, then switch on this unit.

-The connected device’s video input is set correctly for this unit.

-The connected device is compatible with 720X576i(480i), 720X576p(480p), 1280X720p, 1920X1080i or 1920X1080p video input.

-The 1080p, 720p and 576p(480p) resolutions are the progressive scan applied resolution.

•Not all HDCP-compatible DVI devices will work with this unit.

-The picture will not be displayed properly with non- HDCP device.

HDMI compatible TV

HDMI

(not supplied) H

Rear of DVD/CD Receiver

Resolution setting

You can change the resolution for component video and HDMI output.

Press SCAN MODE repeatedly to select the desired resolution - 480i, 480p, 720p, 1080i, 1080p

The resolution may not be selected depending on the connection or TV.

Note:

Depending on your TV, some of the resolution settings may result in the picture disappearing or an abnormal picture appearing. In this case, press SCAN MODE repeatedly until the picture re-appears.

You can set 1080p video resolution to enjoy Full HD picture quality. (Full HD up-scaling)

Available resolution according to connection

HDMI OUT - 1080p, 1080i, 720p 480p and 480i

COMPONENT VIDEO OUT - 480p and 480i

VIDEO OUT - 480i

Note:

If your TV does not accept your resolution setting, abnormal picture appears on the screen.

Please read owner’s manual for TV, and then set the resolution that your TV can accept.

Installation and Setup

8