Sleep Timer Setting
Press SLEEP/DIMMER one or more times to select delay time between 10 and 180 minutes, after the player will turn off.
To check the remaining time, press SLEEP/DIMMER To cancel the sleep function, press SLEEP/DIMMER repeatedly until “SLEEP 10” appears, and then press SLEEP/DIMMER once again while “SLEEP 10” is displayed.
Note:
You can check the remaining time before the DVD/CD Receiver turns off.
Press SLEEP/DIMMER. The remaining time appears in the display window.
Dimmer
Press SLEEP/DIMMER once. The LED
Muting
Press MUTING to mute your unit.
You can mute your unit in order, for example, to answer the telephone, the “MUTING” indicator flickers in the display window.
Note:
This muting doesn’t affect the audio output to HDMI; it only mutes the output of speakers connected to the unit.
Setting the disc ejection lock
You can lock the disc tray to prevent the disc form being ejected.
When the main unit is turned off, hold down the STOP key at the front panel for 5 seconds
If you attempt to open the disc tray by pressing OPEN/CLOSE key, the disc tray does not open and “LOCKED” appears in the display window.
To cancel the disc ejection lock, hold down the STOP key at the front panel for 5 seconds again when the main unit is turned off.
“UNLOCKED” is displayed in the display window.
Note:
Before the main unit is turned off, DVD/CD function should be selected.
Enjoying audio form an external source
You can enjoy audio form an external source through your unit.
Press INPUT repeatedly to select the desired input source. - AUX, AUX OPT, AUDIO IN
Setting the surround mode
This system has a number of
The displayed items for the Equalizer may be different depending on sound sources and effects.
[[PLII MOVIE/ PLII MUSIC/ PLII MTRX(matrix)] Dolby Pro Logic II enables you to play stereo source on 5.1- channel.
[Bypass] You can enjoy the sound without equalizer effect.
Notes:
•In some of surround modes, some speakers maybe no sound or low sound, it depends on the mode of surround and the source of audio, it is not defective.
•You may need resetting the surround mode, after switch the input, sometimes even after the sound track changed.
Operation
20