Troubleshooting, Problem | Hotpoint BHWM129 manual

Troubleshooting

Your washing machine could fail to work. Before contacting the Technical Assistance Centre

(see “Assistance”), make sure that the problem cannot be not solved easily using the following list.	GB

Problem

The machine does not switch o n .

The wash cycle does not start .

The machine does not fill with water or the indicator light for the first wash cycle stage flashes rapidly.

The machine continuously fills with water and continually drains away or Water left in the dru or Stuck on wash.

The machine does not drain or spin .

The machine does not heat or poor wash results.

The programme takes too long.

The machine vibrates a lot during the spin cycle.

Possible causes/Solution:

•The appliance is not plugged into the socket fully, or not enough to make contact.

•There is no power to the socket, or the fuse has blown in the mains plug.

•The door is not closed properly.

•The 'ON/OFF' button has not been pressed.

•The 'START/PAUSE' button has not been pressed.

•The water tap has not been turned on to allow water to flow into the machine.

•A delayed start has been set.

•The water inlet hose is kinked.

•The water inlet hose is not connected to the water supply.

•The water pressure is too low.

•The water tap has not been turned on to allow water to flow into the machine.

•There is no water supply to the house.

•The inlet valve filter is blocked.

•The 'START/PAUSE' button has not been pressed.

•The top of the drain hose is too low - It must be fitted at a height between 65 and 100 cm from the floor.

•The drain hose is connected incorrectly to the sink trap allowing water to run into the machine, the drain hose must be positioned higher than the bottom of the sink to prevent water flowing down the drain hose.

•The end of the drain hose has been pushed too far down the

standpipe, the 'U' bracket should be fitted 100 mm from the end of the drain hose.

•The Pump filter is blocked.

•The drain hose is kinked.

•New Installation - The blanking cap or spigot has not been removed if connected under a sink.

•The drain hose or sink trap is blocked.

•The wash cycle does not include draining, some wash cycles require the drain phase to be started manually.

•The REDUCED CREASES function button has been activated. To complete the wash cycle, press the START/PAUSE button.

•The 'Spin Speed' selector knob is in the position.

•The 'Temperature' selector knob is in the position.

•Programme times will vary due to water pressure, the incoming water temperature and if the wash load goes out of balance. This will increase the programme times accordingly (see ' The machine wont spin properly' below).

•The feet have not been adjusted, enabling the machine to rock.

•New Installation - Either the Transit Bolts including the plastic spacers, or the Polystyrene Packaging have not been removed when installing the machine.

•The machine is trapped between cabinets and/or walls.

•The load is in a slight out of balance condition and machine is spinning, but at a lower speed.

BHWM129 specifications

The Hotpoint BHWM129 is a washing machine that combines efficiency with advanced technology to deliver an exceptional laundry experience. Designed for modern households, this model is equipped with a range of features tailored to enhance both cleaning performance and user convenience.

One of the standout characteristics of the Hotpoint BHWM129 is its energy efficiency. With an impressive A+ energy rating, the machine minimizes energy consumption while still providing powerful cleaning capabilities. This not only helps reduce electricity bills but also contributes to environmental sustainability.

The BHWM129 boasts a generous 7kg capacity, making it an ideal choice for small to medium-sized families. This allows users to wash larger loads in a single cycle, saving both time and water. Additionally, the machine offers different washing programs to cater to various fabric types and levels of soiling. Options include Cotton, Synthetics, and Delicates, ensuring that each load is treated effectively.

A highlight of the Hotpoint BHWM129 is its innovative technologies designed to enhance cleaning performance. The Anti-Stain technology is particularly notable, as it helps actively remove tough stains without the need for pre-soaking. This feature is a game-changer for busy households, where time is often of the essence.

The machine also features a digital display that simplifies operation. This intuitive interface allows users to easily select desired programs and monitor the remaining time of the cycle. The Delay Start function is another user-friendly feature, enabling users to set the machine to start later, offering flexibility for busy schedules.

In terms of reliability, Hotpoint is known for creating durable appliances, and the BHWM129 is no exception. Constructed with robust materials, the washing machine is designed to withstand the rigors of daily use. Additionally, Hotpoint’s quality assurance processes guarantee a product that consistently meets high performance standards.

Finally, noise levels during operation are surprisingly low, making the BHWM129 suitable for open-concept living spaces. With its comprehensive array of features, advanced technologies, and focus on efficiency, the Hotpoint BHWM129 is an excellent choice for anyone seeking a dependable and high-performing washing machine that meets the demands of everyday life.