Installation, Unpacking and levelling | Hotpoint Washing Machine

Installation

		! Keep this instruction manual in a safe place for future refe-
	GB
	GB	rence. Should the appliance be sold, transferred or moved,
		rence. Should the appliance be sold, transferred or moved,
		make sure the instruction manual accompanies the washing
		make sure the instruction manual accompanies the washing
		machine to inform the new owner as to its operation and
		features.
		! Read these instructions carefully: they contain vital infor-
		mation on installation, use and safety.
		Unpacking and levelling

2.If the floor is not perfectly level, compensate for any unevenness by tightening or loosening the adjustable front feet (see figure); the angle of inclination, measured accor- ding to the worktop, must not exceed 2°.

Levelling your appliance correctly will provide it with sta- bility and avoid any vibrations, noise and shifting during operation. If it is placed on a fitted or loose carpet, adjust the feet in such a way as to allow enough room for ventila-

Unpacking

!This is a separate part of the polystyrene base and should be removed with the base.

!IMPORTANT check when unpacking your machine.

tion beneath the washing machine.

Electric and water connections

Connecting the water inlet hose

1. Connect the supply pipe by screwing it to a cold water tap using a 3/4 gas threaded connection (see figure).

Before performing the con- nection, allow the water to run freely until it is perfectly

1.Unpack the washing machine.

2.Check whether the washing machine has been dama- ged during transport. If this is the case, do not install it and contact your retailer.

3.Remove the 4 protective

screws and the rubber bush with the respective spacer, situated on the rear of the appliance (see also the installation leaflet).

clear.

2. Connect the other end of the water inlet hose to the washing machine, screwing it onto the ap- pliance’s cold water inlet, situated on the top right- hand side on the rear of the appliance (see figure).

4.Seal the gaps using the plastic plugs provided.

5.Keep all the parts: you will need them again if the wa-

shing machine needs to be moved to another location. ! Packaging materials are not children’s toys.

Levelling

Your machine may make a considerable amount of noise if the two front feet have not been adjusted correctly. 1. Install the washing machine

on a flat sturdy floor, without resting it up against walls, cabinets or anything else.

3. Make sure there are no kinks or bends in the hose.

!The water pressure at the tap must be within the values indicated in the Technical details table (on the page 5).

!If the water inlet hose is not long enough, contact a spe- cialist store or an authorised serviceman.

!Ensure that the supply taps are allowing water through. Old taps may seize in the closed position and thus pre- vent water reaching the machine.

!Never use second-hand or old inlet hoses; use the pro- ducts supplied with the machine.

Washing Machine specifications

Hotpoint washing machines have earned a remarkable reputation for their reliability, innovative technologies, and user-friendly features. These appliances are designed to provide effective laundry solutions, ensuring that clothes are cleaned thoroughly while remaining gentle on fabrics. Let's explore the main features, technologies, and characteristics that set Hotpoint washing machines apart.

One of the most notable features of Hotpoint washing machines is their energy efficiency. Many models are equipped with an A+++ energy rating, which indicates low energy consumption. This not only helps in reducing energy bills but also contributes to a more sustainable approach to washing laundry. Hotpoint has made a commitment to environmental responsibility, designing machines that minimize water usage and energy consumption without compromising performance.

Another key technology found in Hotpoint washing machines is the Anti-Stain technology. This innovative feature effectively targets and eliminates a variety of tough stains by optimizing the washing cycle for different fabrics. The machine recognizes the type of stain and adjusts the temperature and wash action accordingly, ensuring that all garments are treated with care. This focus on stain removal is especially beneficial for families with children or those engaged in outdoor activities.

Hotpoint washing machines also incorporate the Direct Injection technology, which pre-mixes detergent and water before it enters the drum. This allows for better distribution of detergent throughout the wash cycle, leading to cleaner clothes and reduced detergent waste. By enhancing the efficiency of the wash process, this technology ensures that clothes come out sparkling clean with less effort.

In terms of user convenience, Hotpoint washing machines come equipped with intuitive touch controls and a selection of pre-programmed cycles tailored to various fabric types and washing needs. Models often feature quick wash cycles, allowing users to enjoy thoroughly cleaned clothes in a fraction of the time. Additionally, many Hotpoint machines offer a delay-start function, enabling users to schedule washes during off-peak energy times or when it’s most convenient for them.

The design and build quality of Hotpoint washing machines also deserve mention. With modern aesthetics and durable materials, these machines can seamlessly blend into any laundry room while ensuring reliability. Furthermore, many models come with a large drum capacity, accommodating larger loads and reducing the frequency of laundry days.

In summary, Hotpoint washing machines combine efficiency, innovative technologies, and user-friendly features to create a superior laundry experience. The blend of energy efficiency, stain removal capabilities, and advanced wash technologies makes them a popular choice among consumers looking for reliable and effective laundry solutions. With their commitment to quality and sustainability, Hotpoint continues to be a leader in the washing machine market.