Hotpoint Washing Machine manual Wash cycles, Table of wash cycles

Wash cycles

	Table of wash cycles
GB
	cycles	Description of the wash cycle
	Wash

CLEAN Plus

1Anti Stain

2 Whites

Cotton Standard 60° (1): heavily soiled whites and resistant colours.

Cotton Standard 40° (2): lightly soiled resistant and delicate colours.

5Cotton Standard 20°: lightly soiled resistant and delicate colours.

6 Synthetics: heavily soiled resistant colours.

6 Synthetics (3): lightly soiled resistant colours.

SPECIALS

7 Anti Allergy

8 Baby

9 Bed&Bath: washes bathroom laundry and bedlinen.

10	Fastwash 60’: to refresh normal soiled garments quickly (not suitable
	for wool, silk and clothes which require washing by hand).
11	Fastwash 30’: to refresh lightly soiled garments quickly (not suitable
	for wool, silk and clothes which require washing by hand).
	EXTRAS
12	Shirts
13	Wool: for wool, cashmere, etc.
14	Delicates
	Partials cycles
	Rinse
	Spin+Pump out

Max.	Max.
temp.	speed
(°C)	(rpm)
40°
	1350
60°	1350
60°	1350
(Max. 90°)
40°	1350
20°	1350
60°	800
40°	800
60°
	1350
40°	1000
60°	1350
60°	1350
30°	800
40°
	600
40°	800
30°	0
-
	1350
-	1350

Detergents

Wash	Fabric softener
	
	
	
	
	
	
	
	
	
	
	
	
	
	
	
-	
-	-

loadMax.(kg)	Residual dampness%	Energy	consumption	waterTotallt	Cycle duration
			kWh
5	-		-	-	180’
5	-		-	-	180’
8	53	1.23		73	200’
8	53	1.01		84	185’
8	-		-	-	175’
4	46	1.03		60	110’
4	46	0.56		60	95’
5	-		-	-	195’
5	-		-	-	145’
8	-		-	-	140’
3.5	53	0.84		44	60’
3.5	71	0.20		38	30’
2	-		-	-	70’
2	-		-	-	90’
1	-		-	-	80’
8	-		-	-	36’
8	-		-	-	16’

The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary accor- ding to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.

1) Test wash cycle in compliance with directive 1061/2010: set wash cycle with a temperature of 60°C.

This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at 60°C. The actual washing temperature may differ from the indicated value.

2) Test wash cycle in compliance with directive 1061/2010: set wash cycle with a temperature of 40°C.

This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at 40°C. The actual washing temperature may differ from the indicated value.

For all Test Institutes:

2)Long wash cycle for cottons: set wash cycle with a temperature of 40°C.

3)Long wash cycle for synthetics: set wash cycle 6 with a temperature of 40°C.

8