INSTALLATION REQUIREMENTS
Tools and Parts
Parts supplied:
Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.
Tools needed:
#2 Phillips screwdriver | ||
|
|
|
|
|
|
Wire stripper | Tin snips | |
(direct wire installations) | (new vent installations) | |
|
|
|
|
|
|
1/4" nut driver | Vent clamps |
(recommended) |
|
Leveling legs (4)
Parts package is located in dryer drum. Check that all parts are included.
Parts needed:
Check local codes. Check existing electrical supply and venting, and read “Electrical Requirements” and “Venting Requirements” before purchasing parts.
Mobile home installations require metal exhaust system hardware, available for purchase from the dealer from whom you purchased your dryer. For further information, please reference the “Assistance or Service” section of the Use and Care Guide.
If using a power supply cord:
Use a UL listed power supply cord kit marked for use with clothes dryers. The kit should contain:
■■ A UL listed
■■ A UL listed strain relief.
Adjustable wrench that opens to 1" (25 mm) or
Tape measure
Level
Utility knife
Pliers
Caulking gun and compound (for installing new exhaust vent)
Location Requirements
You will need:
■■ A location allowing for proper exhaust installation. See “Venting Requirements.”
■■ A separate
Putty knife
3