Whirlpool L-63 manual Section Three, Console Control Repairs, Removing the Console

SECTION THREE

COMPONENT ACCESS

CONSOLE CONTROL REPAIRS

!WARNING

ELECTRIC SHOCK HAZARD

Disconnect the electrical power before servicing any components.

Failure to do so can result in death or electrical shock.

Note : Potential floor damage. Slide dryer onto cardboard or hardboard before moving across floor. Failure to do so may damage floor covering.

Removing the Console

1.Remove the two screws at the base of the console. (Fig.11)

2.Grab console on both sides. Pull console towards you, lifting the tabs up and out of the console slots. Carefully flip console back to make repairs. Do not lean console against wall. Console may mar or damage wall. If dryer is too close to wall, pull dryer forward so console does not touch wall. (Fig. 12)

			Fig. 11							Fig. 12
Electronic				“Clean Touch”
	Dryness					Switch		Push-to-Start
		Control Timer			Assembly		Buzzer		Switch

Fig. 13

13