When moving the dryer...
l Disconnect the electrical cord and grounding wire and tape securely to dryer
lShut off the gas supply valve controls in the gas supply line.
l Disconnect gas pipe and fittings from dryer and cap the gas supply line.
lTape the drum to the front panel. Tape the dryer door, lint screen lid and end of gas pipe.
l Screw leveling legs all the way in. Before installing your dryer in your new home, check with your gas supplier or dealer to see that your dryer is equipped with the correct burner for the particular type of gas in your new home. Burner information may be found on the rating plate in the door well of the dryer
If you move...To make sure that your appliance is correctly installed
and to insure its continued satisfactory operation, call your dealer (Installation cost will, of course, be paid by you.)
Helpful hints...You can help your service representative give you faster service if you include the model and serial number of your appliance when requesting service. Also, retain your sales slip and warranty to verify your warranty status.
Remember...Your service representative is trained in the repairing and servicing of your WHIRLPOOL appliances. He can help you maintain the quality originally built into your WHIRLPOOL appliance.
If you have a problem*:
Call your dealer or write: Service Manager, International Division Whirlpool Corporation Administrative Center 2000 U.S.33 North
Benton Harbor, Michigan 49022
*If you must write, please provide: your name, address, telephone number, type of appliance, brand, model, serial number, date of purchase, the dealer’s name, and a complete description of the problem. This information is needed in order to better respond to your request for assistance.
0% CORPORATION
Part No. 696322 | Prepared by Whirlpool Corporation, Benton Harbor, Michigan 49022 | Printed in U.S.A. |