Whirlpool DRYERS warranty Maintenance-as needed, Cleaning a clogged lint screen

Page 19

Maintenance-as needed

Use the following suggestions about cleaning and lint removal to maintain your dryer and keep it operating efficiently.

Cleaning a clogged lint screen

Laundry detergents and fabric softeners can cause a residue build-up on the lint screen. A clogged lint screen can extend drying times. Clean the lint screen every six months or more frequently if it becomes clogged due to a residue build-up. Use the following method:

1.Wet both sides of lint screen with hot water.

2.Wet a nylon brush with hot water and liquid detergent.

3.Scrub lint screen with the brush until all residue build-up is removed.

4.Rinse with hot water.

5.Thoroughly dry lint screen with a clean towel and replace in dryer.

Cleaning the dryer interior

Garments which contain unstable dyes, such as denim blue jeans or brightly colored cotton items, may discolor the dryer interior.

If you want to remove stains from dryer drum use one of the following methods:

Powdered laundry detergent

1.Make a paste with detergent and very warm water.

2.Apply paste to a soft cloth and scrub area until all excess dye is removed.

3.Wipe thoroughly with a damp cloth.

4.Tumble a load of rags to dry.

OR

Llquld non-flammable household cleaner

1.Apply to stained area.

2.Rub with a cloth until all excess dye is removed.

3.Wipe thoroughly with a damp cloth.

4.Tumble a load of rags to dry.

Cleaning the dryer exterior

Wipe with a soft, damp cloth.

Electrlcal Shock,

Personal InJury and Fire Hazard

l Turn off the electrical power before cleaning the interior.

lMake sure the dryer is cool.

. Use non-flammable cleaner.

Failure to do so could result in electrical shock or injury, fire or explosion.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Automatic Dryers Understanding SafetyThank you for buying a Whirlpool appliance Your safety is important to usWhat to do if YOU Smell GAS Understanding SafetyUnderstanding your responsibilities Important SAFEl-Y InstructionsOther doors Knowing Your Dryer’s FeaturesBefore starting your dryer Operating Your DryerStarting or stopping your dryer Push the Start Button, if necessary Selecting a cycleUsing the automatic cycles AIR Using the Air cycle no heatUsing the Timed Drying cycle Type of LoadUsing the Damp Dry cycle Using the Tumble PRESW’ cycleUnderstanding Finish GUARD@ cycle Using end of cycle signal Finish GUARD’ cycle selector Permanent PRESS, Synthetics and Blends Cycle control knob with 3 temperature settingsHigh Heat LOW HeatDelicate Fabrics Cycle control knob and a temperature selector 2 settingsLOW MED LinensKnits Automatic Cycle High MED LOW EX LOW Cycle co&l Knob Temperature Tor End oicyck Rack DRY Using the drying rackTemperature Time Drying rack suggestionsCaring For Your Dryer Maintenance-every loadCleaning the lint screen Lint signalCleaning the dryer exterior Maintenance-as neededCleaning a clogged lint screen Cleaning the dryer interiorElectrlcal Shock and Fire Hazard Changing the drum lightRemoving accumulated lint Drum seal Sorting Laundry TipsBefore you dry Drying tipsDrying special-care items Diapers, baby clothes Elastic Items Saving energy Using dryer fabric softenersVacation care Problem Solving laundering problemsCAUSES/SOLUTIONS Problem Check if Solution If You Need Assistance Or ServiceBefore calling for assistance If you need FSP replace- ment parts If you need serviceIf you are not satisfied with how the problem was solved If you need assistancePage Whirlpool will PAY for Length of WarrantyWhirlpool will not PAY for
Top Page Image Contents