Whirlpool DRYERS warranty Changing the drum light, Electrlcal Shock and Fire Hazard

Page 20

Changing the drum light

(on some mad&)

Electrlcal Shock and Fire Hazard

l Before removing light bulb, either unplug the dryer or disconnect the dryer at the main power supply.

l The bulb cover must be in place during dryer operation to prevent overheating and possible damage to fabrics. Operating the dryer with the bulb cover removed can cause the dryer to fail or create a fire hazard.

1.Unplug the dryer or disconnect the elec- tricity leading to the dryer at the main power

supply-

2.Open the dryer door and remove the light bulb cover from back wall of the dryer. Turn the cover clockwise to remove.

3.Remove the light bulb by turning it counter- clockwise.

4.Replace the bulb with a 40-watt appliance bulb only.

5.Replace the light bulb cover and lock in place by turning counterclockwise.

6.Reconnect power supply.

Remove bulb cover

Replace bulb cover

\\

20

Image 20

Contents Understanding Safety Automatic DryersYour safety is important to us Thank you for buying a Whirlpool applianceUnderstanding Safety What to do if YOU Smell GASImportant SAFEl-Y Instructions Understanding your responsibilitiesKnowing Your Dryer’s Features Other doorsStarting or stopping your dryer Operating Your DryerBefore starting your dryer Selecting a cycle Push the Start Button, if necessaryUsing the automatic cycles Using the Air cycle no heat Using the Timed Drying cycleType of Load AIRUnderstanding Finish GUARD@ cycle Using the Tumble PRESW’ cycleUsing the Damp Dry cycle Using end of cycle signal Finish GUARD’ cycle selector Cycle control knob with 3 temperature settings High HeatLOW Heat Permanent PRESS, Synthetics and BlendsLOW Cycle control knob and a temperature selector 2 settingsDelicate Fabrics Knits LinensMED Automatic Cycle High MED LOW EX LOW Cycle co&l Knob Temperature Tor End oicyck Using the drying rack Temperature Time Drying rack suggestions Rack DRYMaintenance-every load Cleaning the lint screenLint signal Caring For Your DryerMaintenance-as needed Cleaning a clogged lint screenCleaning the dryer interior Cleaning the dryer exteriorChanging the drum light Electrlcal Shock and Fire HazardRemoving accumulated lint Drum seal Laundry Tips Before you dryDrying tips SortingDrying special-care items Diapers, baby clothes Elastic Items Vacation care Using dryer fabric softenersSaving energy CAUSES/SOLUTIONS Solving laundering problemsProblem Problem Check if Before calling for assistance If You Need Assistance Or ServiceSolution If you need service If you are not satisfied with how the problem was solvedIf you need assistance If you need FSP replace- ment partsPage Whirlpool will not PAY for Length of WarrantyWhirlpool will PAY for