Miele Mastering the Ironing Process with 's B990 Model

Page 17

Ironing

Ironing

The ironing process is controlled by the foot pedal which has three operating positions:

–raising the heater plate (rest)

–pressing

–ironing

To iron

Press the foot pedal down to the floor.

Do not put fingers between the heater plate and the roller. Danger of burning and injuring fingers.

To press

First press the foot pedal down to the floor and then lift your foot up a little so that the heater plate remains in position but the roller does not rotate.

To raise the heater plate

Take your foot off the pedal.

17

Image 17

Contents Operating instructions Rotary Iron 990 Contents Appropriate use Technical and electrical safetyUse Accessories Guide to the Rotary Iron Control panel Moving the appliance Moving the applianceTransport strut Moving the appliance Power cord Before using for the first timeBefore using for the first time Preparing the work area Before ironingCorrect dampness Preparing the laundryMaterial Dampness for ironing Pulling into shape and smoothing outPlease note Testing the finger guardIroning Turning on and off Selecting the ironing TemperatureTo turn on To turn offSelecting the roller speed To iron IroningTo press To raise the heater plateLaundry bar Positioning the laundryRemoving the feed board If the rotary iron is to be stored away After ironingIroning tips Power failure Tablecloths Ironing TipsNapkins, hand towels Sheets and bedspreadsIf folds are acceptable Duvet coversTo iron without a fold Shoulder yoke ShirtsCollar Front sidesBack Cuffs and sleeves Skirts PantsIroning pants and jeans Pressing woolen and dress pantsCleaning the heater plate Cleaning and CareCleaning the casing Washing or replacing the iron coverCleaning and Care Cleaning and Care Cleaning and Care Frequently asked questions MieleCare After sales serviceElectrical connection Technical data Disposal of an old appliance Help protect our environmentDisposal of packing materials Page Alteration rights reserved Nr 658 660