Cleaning and Care
Insert the long edge of the new ironing cover into the retaining slot with the side seams inside (upside down). Keep side ties hanging free and smooth out.
Turn the roller by hand in the direction you iron (see arrow) until the retaining slot is at the bottom.
Turn the rotary iron on.
Press the foot pedal and "iron" the new cloth around.
Do not let the cords get under the cloth as it turns.
After the roller has gone through three or four revolutions and the end of the ironing cover is under the heater plate:
Turn the rotary iron off while keeping the foot pedal pressed down.
The ironing cover is held firmly in place with the heater plate which is still lowered.
28