Ironing Tips
Shirts
Remove the feed board to iron shirts.
1. Shoulder yoke
Arrange the yoke, collar first, on the roller and smooth out.
Hot press the yoke.
2. Collar
The collar is ironed on both sides using the left hand end of the roller. Stop ironing when the button comes to the heater plate.
Then turn down the collar and press lightly, holding taut.
3. Front sides
Lay the button hole front on the left hand end of the roller with the side seam along the edge of the roller.
Iron from the button hem up to the armhole.
Now move the shirt out and iron past the armhole to the side seam.
Iron the button side inside out so the buttons are pressed into the cushioned surface of the roller.
23