Before ironing
Testing the finger guard
The finger guard is a safety feature and should be checked each time the rotary iron is used.
With the rotary iron turned on, press the foot pedal down.
The heater plate comes down onto the rotating roller.
If you lift the finger guard now, the roller stops rotating and the heater plate rises.
This shows that the finger guard is working.
Let go of the finger guard and remove your foot from the foot pedal.
Press the foot pedal down again.
The heater plate lowers and the roller rotates.
Please note:
Any unevenness in the ironing cover will smooth itself out after 3 hours of use.
When using a new machine, if delicate laundry is not properly pulled into the rotary iron continue ironing. This is usually solved after
If a new ironing cover is used, wash the cloth at a high temperature (140°F/ 60°C) to achieve an optimal
14