KH 1281
Operation
Filling with Tap Water
•When it is cool, place the steam iron in a horizontal position on its gliding sole .
•Open the filler opening for the water reservoir .
•Fill the reservoir with tap water using
the measuring cup , at most to the "MAX" marking.
• Close the water reservoir filler ope- ning , making sure it "clicks" shut.
The control light for the temperature lights up. When the control light goes out, the chosen temperature has been reached.
• | Wait until the temperature control |
| light goes out. |
• | To moisten the material, press the |
| button for the water fog . |
This function is suitable for very dry, crumpled or creased materials.
Plugging In and Ironing
Dry ironing without steam is possible at all temperatures, steam ironing is only possible from setting 2 (••).
•Plug the power plug into a power socket of 230 V~/50 Hz.
Important!
Should the care instructions for an article of clothing not mention ironing, (Symbol 
), you should not iron that clothing article. You could otherwise cause damage to the clothing article.
•Check the care instructions on the labels of the clothing article whether and at which temperature the clo- thing article may be ironed.
•Set the appropriate temperature set-
ting with the temperature control .
Steam Ironing
• Set the steam control to the desired steam strength setting.
Ironing with Steam Spray
The steam spray is especially suited to smoothing places in the laundry that are difficult to access.
•Raise the steam iron a little way.
•Press the steam spray button to
release the steam spray .
Setting the Steam Iron Temporarily Aside
Fire Hazard!
Never leave the steam iron unattended when it is hot or switched on.
• Set the temperature control to the position "MIN“.
• Only put the steam iron down on its standing foot , fig. 2.
- 6 - |