ing, contact Harbor Freight Tools for a replacement.
2.Place securely on Iron Holder (6) when not in use.
3.Keep away from flammable objects.
4.Do not overheat adhesive.
5.When using a handheld tool, maintain a firm, controlling grip on the tool.
6.Do not leave the tool unattended when it is plugged into an electrical outlet. Unplug the tool from its elec- trical outlet and allow to cool down before leaving.
7.This product is not a toy. Keep it out of reach of children.
8.Any power cord must be properly grounded. Ground Fault Circuit Inter- rupter (GFCI) should also be imple- mented – it prevents sustained elec- trical shock.
9.WARNING: Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. (California Health & Safety Code § 25249.5, et seq.)
10.The warnings, precautions, and in- structions discussed in this instruction manual cannot cover all possible con- ditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
Save these instructions.
Grounding
To prevent electric shock
and death from incorrect grounding wire connection: Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding prong from the plug. Do not use the tool if the power cord or plug is damaged. If damaged, have it repaired by a qualified service technician before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician.
Grounded Tools: Tools with Three
Prong Plugs
1.Tools marked with “Grounding Re- quired” have a three wire cord and three prong grounding plug. The plug must be connected to a properly
SKU 66738 | For technical questions, please call | Page 4 |