Maintenance And
Servicing
Procedures not specifically explained in this manual must be performed only by a qualified technician.
To prevent serious injury
from accidental operation:
Turn the Calibration Knob of the tool to its “OFF” position and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
Cleaning and Maintenance
1.BEFORE EACH USE, inspect the general condition of the tool. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wir- ing, and any other condition that may affect its safe operation.
2.After Use, clean Bottom Sole Plate (5) of any glue or adhesive that may have transferred on by rubbing on a clean scrap of carpeting while still hot.
3.Place back on Iron Holder when not in use.
4.WARNING! If the supply cord of this tool is damaged, it must be re- placed only by a qualified service technician.
SKU 66738 | For technical questions, please call | Page 9 |