Troubleshooting
Problem |
| Possible Causes |
| Likely Solutions | |
| 1. | No power at outlet. | 1. | Check power at outlet. | |
Tool will not heat | 2. | Cord not connected. | 2. | Check that cord is plugged in. | |
3. | Heat Control Knob in OFF | 3. | Turn Heat Control Knob to a heat setting | ||
| |||||
|
| position. |
| position. |
Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service.
PLEASE READ THE FOLLOWING CAREFULLY
The manufacturer and/or distributor has provided the parts list and assembly diagram in this manual as a reference tool only. Neither the manufacturer or distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product, or that he or she is qualified to replace any parts of the product. In fact, the manufacturer and/ or distributor expressly states that all repairs and parts replacements should be undertaken by certified and licensed technicians, and not by the buyer. The buyer assumes all risk and liability arising out of his or her repairs to the original product or replacement parts thereto, or arising out of his or her installation of replacement parts thereto.
Parts List
Part Description
1Handle Set w(8) Screws
2Cord Set (Relief Spring, Wire Connection Clip, two Screws
3Thermostat w/ Extension Post for Control Knob
4Top Sole Plate w/five Screws
5Bottom Sole Plate, Aluminum, Flat
6Iron Holder
7Internal Wire Set (2 pieces)
8Heat Control Knob
9Heat Shield w/2 Screws and (1) Washer
10Gasket (Top of heat shield for Handle Mount)
11Gasket (Between Heat Shield for top of Sole Plate)
12Heating Element
SKU 66738 | For technical questions, please call | Page 10 |