Harbor Freight Tools 66738 Specifications, Unpacking, Operating Instructions

Specifications

Electrical Requirements	120 V~, 800 W
Power Cord	112" L, 3-Prong
	Grounded
Temperature Range	147° - 442° F

Temperature Setting

Heat	Temperature	Time to Reach
Setting	Range F
1	147° - 190°	2 Minutes
2	230° - 298°	3 Minutes
3	311° - 379°	3.5 Minutes
4	374° - 442°	4 Minutes

Unpacking

When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at 1-800-444-3353 as soon as possible.

Operating Instructions

Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

Work Piece and Work Area Set Up

1.Designate a work area that is clean and well-lit. The work area must not allow access by children or pets to prevent injury and distraction.

2.Route the power cord along a safe route to reach the work area without creating a tripping hazard or exposing the power cord to possible damage. The power cord must reach the work area with enough extra length to al- low free movement while working.

3.There must not be hazardous ob- jects, such as utility lines or foreign objects, nearby that will present a hazard while working.

General Operating Instructions

1. Place the Iron Holder (6) on a flat, level, non-flammable surface.

2. Wear ANSI-approved safety goggles and heavy-duty work gloves during use. Forced-air ventilation may be required depending on the type of glue being heated.

3. Turn the Heat Control Knob (8) to the “OFF” position.

4. Place the Iron securely into the Iron Holder.

5. Turn the Heat Control Knob to the setting desired and wait until the Iron

SKU 66738 For technical questions, please call 1-800-444-3353. Page 7