Miele T1520 To select a program, To change a program during drying, Correct procedure

Page 11

Program selection

To select a program

A program can only be selected when the machine is turned on.

Set the desired program by turning the program selector either clock- wise or counterclockwise.

Press the “Start” button.

The program status will be stored for 30 minutes in the event of a power failure.

The program is cancelled if

–There is a power failure lasting more than 30 minutes.

–The program has already reached the “Cooling down” or “Anti-crease” stage.

To change a program during drying

Set the program selector to the desired program.

The new program will start from the be- ginning.

The tables on the following pages lists the range of applications for the differ- ent programs.

Correct procedure

1Press the “On/Off” button.

2Press the “Door” button and load the drum.

3Close the door with a firm swing - do not push it shut.

4If drying a standard load, press the "Load size" button.

5Select a program.

6Press the “Start” button.

After the program has finished

1Set the program selector to “Finish”.

2Remove the laundry.

3Clean the lint filter.

4Turn off the machine.

11

Image 11

Contents Operating Manual for the T 1520 Vented Dryer Contents Guide to the machine Pushbuttons Indicator lampsImportant Safety Instructions Important Safety Instructions Disposal of your old machine Your contribution to the environmentDisposal of the packing ma- terial Unloading the machine Loading the machineFollowing fabrics should not be dried in a tumble dryer Program selection To change a program during drying Correct procedureProgram is cancelled if To select a programMachine iron ProgramsNormal Hand iron rrCool Normal +Hand iron WarmCleaning the dryer Cleaning and care Cleaning the lint filtersWhat to do if, . . . ? Cause Remedy Problem solving guideTo function? Event of a power Failure?Ing the drying cycle? To open the door in the event of a power failure Specimen After-sales serviceThis appliance must be grounded Electrical connectionInstallation InstallationWhere to install the machine Changing the decor panel Decor panel dimensionsFitting a toekick panel Exhaust connection can be made Installation ventingType of bend Angle Radius in mm Additional duct To calculate the effective duct length TabelEffective duct Internal diameter or Length m ExampleResult Dryer-side view Wall vent kit exampleDryer-top view Wire spiral-wound hose Load Final spin speed Electrical Drying time incl Consumption dataCottons Permanent PressTechnical data Page