Miele T1520 operating instructions Wire spiral-wound hose

Page 27

Installation - venting

Fig. 1

Ducting (side view) with flexible vent hose to an exhaust flue.

1.	Wall vent duct	A. Wire spiral-wound hose
2.	Adapter	B. Flexible ducting
3.	Flue isulated against damp

Fig. 2

Ducting (side view) with plastic piping to a wall vent kit.

1.Wall vent kit

2.Adapter

3.Drain pipe (outer dia. 110 mm)

Fig. 3

Connection of piping to the tumble dryer.

1.Drain pipe

2.Adapter for vent duct between tumble dryer and plastic drain pipe

Fig.4

Height of vent outlet for washer dryer stack.

27

Image 27

Contents Operating Manual for the T 1520 Vented Dryer Contents Guide to the machine Pushbuttons Indicator lampsImportant Safety Instructions Important Safety Instructions Your contribution to the environment Disposal of the packing ma- terialDisposal of your old machine Unloading the machine Loading the machineFollowing fabrics should not be dried in a tumble dryer Program selection To change a program during drying Correct procedureProgram is cancelled if To select a programMachine iron ProgramsNormal Hand iron rrCool Normal +Hand iron WarmCleaning the dryer Cleaning and care Cleaning the lint filtersWhat to do if, . . . ? Cause Remedy Problem solving guideEvent of a power Failure? Ing the drying cycle?To function? To open the door in the event of a power failure Specimen After-sales serviceThis appliance must be grounded Electrical connectionInstallation Where to install the machineInstallation Changing the decor panel Decor panel dimensionsFitting a toekick panel Exhaust connection can be made Installation ventingType of bend Angle Radius in mm Additional duct To calculate the effective duct length TabelExample ResultEffective duct Internal diameter or Length m Wall vent kit example Dryer-top viewDryer-side view Wire spiral-wound hose Load Final spin speed Electrical Drying time incl Consumption dataCottons Permanent PressTechnical data Page